# LVPS trip messages from MRS DAQ LogManager. S.Chekanov (ANL)
 01 Jun 2012 13:35:32 CEST   LBC05 seems to be off (at least the ROD link is off). [Run #204240 LB #577] 
 01 Jun 2012 13:36:59 CEST   Start reconfiguring drawer TileLBC05, RunNumber 204240, LBN 578
 01 Jun 2012 13:37:12 CEST   Drawer TileLBC05 reconfigured, RunNumber 204240, LBN 578
 01 Jun 2012 13:40:02 CEST   LBC19 seems to be off (at least the ROD link is off). [Run #204240 LB #581] 
 01 Jun 2012 13:41:39 CEST   Start reconfiguring drawer TileLBC19, RunNumber 204240, LBN 583
 01 Jun 2012 13:41:52 CEST   Drawer TileLBC19 reconfigured, RunNumber 204240, LBN 583
 01 Jun 2012 13:48:03 CEST   LBC53 seems to be off (at least the ROD link is off). [Run #204240 LB #591] 
 01 Jun 2012 13:49:40 CEST   Start reconfiguring drawer TileLBC53, RunNumber 204240, LBN 592
 01 Jun 2012 13:49:52 CEST   Drawer TileLBC53 reconfigured, RunNumber 204240, LBN 592
 01 Jun 2012 13:57:42 CEST   LBA16 seems to be off (at least the ROD link is off). [Run #204240 LB #602] 
 01 Jun 2012 13:59:20 CEST   Start reconfiguring drawer TileLBA16, RunNumber 204240, LBN 604
 01 Jun 2012 13:59:32 CEST   Drawer TileLBA16 reconfigured, RunNumber 204240, LBN 604
 01 Jun 2012 14:02:32 CEST   EBC36 seems to be off (at least the ROD link is off). [Run #204240 LB #607] 
 01 Jun 2012 14:03:59 CEST   Start reconfiguring drawer TileEBC36, RunNumber 204240, LBN 609
 01 Jun 2012 14:04:11 CEST   Drawer TileEBC36 reconfigured, RunNumber 204240, LBN 609
 01 Jun 2012 14:11:22 CEST   LBA09 seems to be off (at least the ROD link is off). [Run #204240 LB #618] 
 01 Jun 2012 14:11:32 CEST   LBA01 seems to be off (at least the ROD link is off). [Run #204240 LB #618] 
 01 Jun 2012 14:12:59 CEST   Start reconfiguring drawer TileLBA09, RunNumber 204240, LBN 619
 01 Jun 2012 14:13:03 CEST   LBA30 seems to be off (at least the ROD link is off). [Run #204240 LB #619] 
 01 Jun 2012 14:13:12 CEST   Drawer TileLBA09 reconfigured, RunNumber 204240, LBN 619
 01 Jun 2012 14:13:20 CEST   Start reconfiguring drawer TileLBA01, RunNumber 204240, LBN 620
 01 Jun 2012 14:13:33 CEST   Drawer TileLBA01 reconfigured, RunNumber 204240, LBN 620
 01 Jun 2012 14:14:40 CEST   Start reconfiguring drawer TileLBA30, RunNumber 204240, LBN 622
 01 Jun 2012 14:14:52 CEST   Drawer TileLBA30 reconfigured, RunNumber 204240, LBN 622
 01 Jun 2012 14:15:24 CEST   LBC55 seems to be off (at least the ROD link is off). [Run #204240 LB #623] 
 01 Jun 2012 14:15:53 CEST   LBA40 seems to be off (at least the ROD link is off). [Run #204240 LB #623] 
 01 Jun 2012 14:16:51 CEST   Start reconfiguring drawer TileLBC55, RunNumber 204240, LBN 624
 01 Jun 2012 14:17:03 CEST   Drawer TileLBC55 reconfigured, RunNumber 204240, LBN 624
 01 Jun 2012 14:17:30 CEST   Start reconfiguring drawer TileLBA40, RunNumber 204240, LBN 626
 01 Jun 2012 14:17:42 CEST   Drawer TileLBA40 reconfigured, RunNumber 204240, LBN 626
 01 Jun 2012 14:24:23 CEST   LBC23 seems to be off (at least the ROD link is off). [Run #204240 LB #634] 
 01 Jun 2012 14:26:10 CEST   Start reconfiguring drawer TileLBC23, RunNumber 204240, LBN 636
 01 Jun 2012 14:26:22 CEST   Drawer TileLBC23 reconfigured, RunNumber 204240, LBN 636
 01 Jun 2012 14:34:22 CEST   LBC05 seems to be off (at least the ROD link is off). [Run #204240 LB #644] 
 01 Jun 2012 14:36:09 CEST   Start reconfiguring drawer TileLBC05, RunNumber 204240, LBN 646
 01 Jun 2012 14:36:22 CEST   Drawer TileLBC05 reconfigured, RunNumber 204240, LBN 646
 01 Jun 2012 14:38:13 CEST   LBA59 seems to be off (at least the ROD link is off). [Run #204240 LB #649] 
 01 Jun 2012 14:39:51 CEST   Start reconfiguring drawer TileLBA59, RunNumber 204240, LBN 650
 01 Jun 2012 14:40:04 CEST   Drawer TileLBA59 reconfigured, RunNumber 204240, LBN 650
 01 Jun 2012 14:40:24 CEST   LBA37 seems to be off (at least the ROD link is off). [Run #204240 LB #651] 
 01 Jun 2012 14:41:13 CEST   LBA35 seems to be off (at least the ROD link is off). [Run #204240 LB #652] 
 01 Jun 2012 14:42:11 CEST   Start reconfiguring drawer TileLBA37, RunNumber 204240, LBN 653
 01 Jun 2012 14:42:23 CEST   LBA35 seems to be off (at least the ROD link is off). [Run #204240 LB #653] 
 01 Jun 2012 14:42:23 CEST   Drawer TileLBA37 reconfigured, RunNumber 204240, LBN 653
 01 Jun 2012 14:43:10 CEST   Start reconfiguring drawer TileLBA35, RunNumber 204240, LBN 654
 01 Jun 2012 14:43:23 CEST   Drawer TileLBA35 reconfigured, RunNumber 204240, LBN 654
 01 Jun 2012 14:43:49 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 14:50:23 CEST   LBA63 seems to be off (at least the ROD link is off). [Run #204240 LB #661] 
 01 Jun 2012 14:52:00 CEST   Start reconfiguring drawer TileLBA63, RunNumber 204240, LBN 663
 01 Jun 2012 14:52:12 CEST   Drawer TileLBA63 reconfigured, RunNumber 204240, LBN 663
 01 Jun 2012 14:52:29 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 15:03:51 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 15:06:13 CEST   LBA63 seems to be off (at least the ROD link is off). [Run #204240 LB #677] 
 01 Jun 2012 15:07:50 CEST   Start reconfiguring drawer TileLBA63, RunNumber 204240, LBN 678
 01 Jun 2012 15:08:02 CEST   Drawer TileLBA63 reconfigured, RunNumber 204240, LBN 678
 01 Jun 2012 15:08:53 CEST   LBA63 is discarding 100% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 01 Jun 2012 15:09:00 CEST   Start reconfiguring drawer TileLBA63, RunNumber 204240, LBN 679
 01 Jun 2012 15:09:12 CEST   Drawer TileLBA63 reconfigured, RunNumber 204240, LBN 679
 01 Jun 2012 15:10:03 CEST   LBA63 is still discarding 100% of events after reconfiguration. It will be automatically power cycled now. Please check the next MRS messages and DCS alarms. 
 01 Jun 2012 15:11:50 CEST   Start reconfiguring drawer TileLBA63, RunNumber 204240, LBN 682
 01 Jun 2012 15:12:02 CEST   Drawer TileLBA63 reconfigured, RunNumber 204240, LBN 682
 01 Jun 2012 15:12:32 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 15:13:53 CEST   LBA61 seems to be off (at least the ROD link is off). [Run #204240 LB #685] 
 01 Jun 2012 15:14:33 CEST   LBC14 seems to be off (at least the ROD link is off). [Run #204240 LB #686] 
 01 Jun 2012 15:14:53 CEST   LBA38 seems to be off (at least the ROD link is off). [Run #204240 LB #686] 
 01 Jun 2012 15:15:30 CEST   Start reconfiguring drawer TileLBA61, RunNumber 204240, LBN 687
 01 Jun 2012 15:15:42 CEST   Drawer TileLBA61 reconfigured, RunNumber 204240, LBN 687
 01 Jun 2012 15:16:00 CEST   Start reconfiguring drawer TileLBC14, RunNumber 204240, LBN 687
 01 Jun 2012 15:16:12 CEST   Drawer TileLBC14 reconfigured, RunNumber 204240, LBN 687
 01 Jun 2012 15:16:43 CEST   LBC05 seems to be off (at least the ROD link is off). [Run #204240 LB #688] 
 01 Jun 2012 15:16:50 CEST   Start reconfiguring drawer TileLBA38, RunNumber 204240, LBN 688
 01 Jun 2012 15:17:03 CEST   Drawer TileLBA38 reconfigured, RunNumber 204240, LBN 688
 01 Jun 2012 15:18:30 CEST   Start reconfiguring drawer TileLBC05, RunNumber 204240, LBN 690
 01 Jun 2012 15:18:42 CEST   Drawer TileLBC05 reconfigured, RunNumber 204240, LBN 690
 01 Jun 2012 15:23:14 CEST   LBA30 seems to be off (at least the ROD link is off). [Run #204240 LB #695] 
 01 Jun 2012 15:23:54 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 15:25:01 CEST   Start reconfiguring drawer TileLBA30, RunNumber 204240, LBN 696
 01 Jun 2012 15:25:13 CEST   Drawer TileLBA30 reconfigured, RunNumber 204240, LBN 696
 01 Jun 2012 15:25:54 CEST   LBA42 seems to be off (at least the ROD link is off). [Run #204240 LB #697] 
 01 Jun 2012 15:27:41 CEST   Start reconfiguring drawer TileLBA42, RunNumber 204240, LBN 699
 01 Jun 2012 15:27:54 CEST   Drawer TileLBA42 reconfigured, RunNumber 204240, LBN 699
 01 Jun 2012 15:32:36 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 15:35:23 CEST   LBA09 seems to be off (at least the ROD link is off). [Run #204240 LB #706] 
 01 Jun 2012 15:36:50 CEST   Start reconfiguring drawer TileLBA09, RunNumber 204240, LBN 708
 01 Jun 2012 15:37:02 CEST   Drawer TileLBA09 reconfigured, RunNumber 204240, LBN 708
 01 Jun 2012 15:43:58 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 15:46:14 CEST   LBA58 seems to be off (at least the ROD link is off). [Run #204240 LB #719] 
 01 Jun 2012 15:48:01 CEST   Start reconfiguring drawer TileLBA58, RunNumber 204240, LBN 722
 01 Jun 2012 15:48:13 CEST   Drawer TileLBA58 reconfigured, RunNumber 204240, LBN 722
 01 Jun 2012 15:48:43 CEST   EBC21 seems to be off (at least the ROD link is off). [Run #204240 LB #724] 
 01 Jun 2012 15:49:44 CEST   LBC34 seems to be off (at least the ROD link is off). [Run #204240 LB #725] 
 01 Jun 2012 15:50:10 CEST   Start reconfiguring drawer TileEBC21, RunNumber 204240, LBN 726
 01 Jun 2012 15:50:21 CEST   Drawer TileEBC21 reconfigured, RunNumber 204240, LBN 726
 01 Jun 2012 15:51:11 CEST   Start reconfiguring drawer TileLBC34, RunNumber 204240, LBN 727
 01 Jun 2012 15:51:23 CEST   Drawer TileLBC34 reconfigured, RunNumber 204240, LBN 727
 01 Jun 2012 15:52:38 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 16:01:33 CEST   LBA07 seems to be off (at least the ROD link is off). [Run #204240 LB #738] 
 01 Jun 2012 16:02:34 CEST   LBA35 seems to be off (at least the ROD link is off). [Run #204240 LB #739] 
 01 Jun 2012 16:02:44 CEST   LBC37 seems to be off (at least the ROD link is off). [Run #204240 LB #739] 
 01 Jun 2012 16:03:00 CEST   Start reconfiguring drawer TileLBA07, RunNumber 204240, LBN 739
 01 Jun 2012 16:03:13 CEST   Drawer TileLBA07 reconfigured, RunNumber 204240, LBN 739
 01 Jun 2012 16:04:01 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 16:04:21 CEST   Start reconfiguring drawer TileLBC37, RunNumber 204240, LBN 740
 01 Jun 2012 16:04:33 CEST   Drawer TileLBC37 reconfigured, RunNumber 204240, LBN 740
 01 Jun 2012 16:04:51 CEST   Start reconfiguring drawer TileLBA35, RunNumber 204240, LBN 741
 01 Jun 2012 16:05:03 CEST   Drawer TileLBA35 reconfigured, RunNumber 204240, LBN 741
 01 Jun 2012 16:12:40 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 16:13:03 CEST   LBC14 seems to be off (at least the ROD link is off). [Run #204240 LB #749] 
 01 Jun 2012 16:14:30 CEST   Start reconfiguring drawer TileLBC14, RunNumber 204240, LBN 750
 01 Jun 2012 16:14:43 CEST   Drawer TileLBC14 reconfigured, RunNumber 204240, LBN 750
 01 Jun 2012 16:21:04 CEST   LBA17 seems to be off (at least the ROD link is off). [Run #204240 LB #757] 
 01 Jun 2012 16:21:54 CEST   LBA18 seems to be off (at least the ROD link is off). [Run #204240 LB #758] 
 01 Jun 2012 16:22:31 CEST   Start reconfiguring drawer TileLBA17, RunNumber 204240, LBN 758
 01 Jun 2012 16:22:43 CEST   Drawer TileLBA17 reconfigured, RunNumber 204240, LBN 758
 01 Jun 2012 16:23:20 CEST   Start reconfiguring drawer TileLBA18, RunNumber 204240, LBN 759
 01 Jun 2012 16:23:33 CEST   Drawer TileLBA18 reconfigured, RunNumber 204240, LBN 759
 01 Jun 2012 16:24:05 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 16:28:54 CEST   LBA12 seems to be off (at least the ROD link is off). [Run #204240 LB #765] 
 01 Jun 2012 16:30:31 CEST   Start reconfiguring drawer TileLBA12, RunNumber 204240, LBN 766
 01 Jun 2012 16:30:43 CEST   Drawer TileLBA12 reconfigured, RunNumber 204240, LBN 766
 01 Jun 2012 16:32:42 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 16:36:04 CEST   LBA18 seems to be off (at least the ROD link is off). [Run #204240 LB #772] 
 01 Jun 2012 16:37:18 CEST   Start reconfiguring drawer TileLBA37, RunNumber 204240, LBN 773
 01 Jun 2012 16:37:30 CEST   Drawer TileLBA37 reconfigured, RunNumber 204240, LBN 773
 01 Jun 2012 16:37:39 CEST   Start reconfiguring drawer TileLBA59, RunNumber 204240, LBN 773
 01 Jun 2012 16:37:52 CEST   Drawer TileLBA59 reconfigured, RunNumber 204240, LBN 773
 01 Jun 2012 16:38:00 CEST   Start reconfiguring drawer TileLBA18, RunNumber 204240, LBN 773
 01 Jun 2012 16:38:13 CEST   Drawer TileLBA18 reconfigured, RunNumber 204240, LBN 773
 01 Jun 2012 16:40:04 CEST   LBC08 seems to be off (at least the ROD link is off). [Run #204240 LB #776] 
 01 Jun 2012 16:40:04 CEST   LBC59 seems to be off (at least the ROD link is off). [Run #204240 LB #776] 
 01 Jun 2012 16:41:42 CEST   Start reconfiguring drawer TileLBC59, RunNumber 204240, LBN 777
 01 Jun 2012 16:41:55 CEST   Drawer TileLBC59 reconfigured, RunNumber 204240, LBN 777
 01 Jun 2012 16:42:03 CEST   Start reconfiguring drawer TileLBC08, RunNumber 204240, LBN 778
 01 Jun 2012 16:42:16 CEST   Drawer TileLBC08 reconfigured, RunNumber 204240, LBN 778
 01 Jun 2012 16:44:09 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 16:46:44 CEST   LBA59 seems to be off (at least the ROD link is off). [Run #204240 LB #784] 
 01 Jun 2012 16:47:03 CEST   EBC17 seems to be off (at least the ROD link is off). [Run #204240 LB #784] 
 01 Jun 2012 16:47:04 CEST   LBC53 seems to be off (at least the ROD link is off). [Run #204240 LB #784] 
 01 Jun 2012 16:48:30 CEST   Start reconfiguring drawer TileEBC17, RunNumber 204240, LBN 786
 01 Jun 2012 16:48:32 CEST   Start reconfiguring drawer TileLBA59, RunNumber 204240, LBN 786
 01 Jun 2012 16:48:42 CEST   Drawer TileEBC17 reconfigured, RunNumber 204240, LBN 786
 01 Jun 2012 16:48:42 CEST   Start reconfiguring drawer TileLBC53, RunNumber 204240, LBN 786
 01 Jun 2012 16:48:44 CEST   Drawer TileLBA59 reconfigured, RunNumber 204240, LBN 786
 01 Jun 2012 16:48:54 CEST   Drawer TileLBC53 reconfigured, RunNumber 204240, LBN 786
 01 Jun 2012 16:49:44 CEST   LBA13 seems to be off (at least the ROD link is off). [Run #204240 LB #787] 
 01 Jun 2012 16:51:11 CEST   Start reconfiguring drawer TileLBA13, RunNumber 204240, LBN 788
 01 Jun 2012 16:51:23 CEST   Drawer TileLBA13 reconfigured, RunNumber 204240, LBN 788
 01 Jun 2012 16:53:42 CEST   Start reconfiguring drawer TileLBA37, RunNumber 204240, LBN 791
 01 Jun 2012 16:53:54 CEST   Drawer TileLBA37 reconfigured, RunNumber 204240, LBN 791
 01 Jun 2012 16:54:54 CEST   LBC53 seems to be off (at least the ROD link is off). [Run #204240 LB #792] 
 01 Jun 2012 16:56:21 CEST   Start reconfiguring drawer TileLBC53, RunNumber 204240, LBN 794
 01 Jun 2012 16:56:34 CEST   Drawer TileLBC53 reconfigured, RunNumber 204240, LBN 794
 01 Jun 2012 17:00:05 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 17:04:11 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 17:05:14 CEST   EBA10 seems to be off (at least the ROD link is off). [Run #204240 LB #804] 
 01 Jun 2012 17:06:41 CEST   Start reconfiguring drawer TileEBA10, RunNumber 204240, LBN 805
 01 Jun 2012 17:06:53 CEST   Drawer TileEBA10 reconfigured, RunNumber 204240, LBN 805
 01 Jun 2012 17:07:54 CEST   LBA16 seems to be off (at least the ROD link is off). [Run #204240 LB #806] 
 01 Jun 2012 17:09:41 CEST   Start reconfiguring drawer TileLBA16, RunNumber 204240, LBN 808
 01 Jun 2012 17:09:54 CEST   LBA29 seems to be off (at least the ROD link is off). [Run #204240 LB #808] 
 01 Jun 2012 17:09:54 CEST   Drawer TileLBA16 reconfigured, RunNumber 204240, LBN 808
 01 Jun 2012 17:11:21 CEST   Start reconfiguring drawer TileLBA29, RunNumber 204240, LBN 810
 01 Jun 2012 17:11:34 CEST   Drawer TileLBA29 reconfigured, RunNumber 204240, LBN 810
 01 Jun 2012 17:19:05 CEST   LBA45 seems to be off (at least the ROD link is off). [Run #204240 LB #817] 
 01 Jun 2012 17:20:07 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 17:20:42 CEST   Start reconfiguring drawer TileLBA45, RunNumber 204240, LBN 819
 01 Jun 2012 17:20:54 CEST   Drawer TileLBA45 reconfigured, RunNumber 204240, LBN 819
 01 Jun 2012 17:24:13 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 17:25:45 CEST   LBA59 seems to be off (at least the ROD link is off). [Run #204240 LB #824] 
 01 Jun 2012 17:25:53 CEST   Start reconfiguring drawer TileLBA37, RunNumber 204240, LBN 824
 01 Jun 2012 17:26:06 CEST   Drawer TileLBA37 reconfigured, RunNumber 204240, LBN 824
 01 Jun 2012 17:26:49 CEST   Start reconfiguring drawer TileLBA59, RunNumber 204240, LBN 825
 01 Jun 2012 17:27:01 CEST   Drawer TileLBA59 reconfigured, RunNumber 204240, LBN 825
 01 Jun 2012 17:44:15 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 18:01:15 CEST   LBC51 seems to be off (at least the ROD link is off). [Run #204240 LB #859] 
 01 Jun 2012 18:02:42 CEST   Start reconfiguring drawer TileLBC51, RunNumber 204240, LBN 860
 01 Jun 2012 18:02:54 CEST   Drawer TileLBC51 reconfigured, RunNumber 204240, LBN 860
 01 Jun 2012 18:04:19 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 18:05:35 CEST   LBA18 seems to be off (at least the ROD link is off). [Run #204240 LB #863] 
 01 Jun 2012 18:07:12 CEST   Start reconfiguring drawer TileLBA18, RunNumber 204240, LBN 865
 01 Jun 2012 18:07:24 CEST   Drawer TileLBA18 reconfigured, RunNumber 204240, LBN 865
 01 Jun 2012 18:11:04 CEST   EBC18 seems to be off (at least the ROD link is off). [Run #204240 LB #869] 
 01 Jun 2012 18:12:31 CEST   Start reconfiguring drawer TileEBC18, RunNumber 204240, LBN 870
 01 Jun 2012 18:12:43 CEST   Drawer TileEBC18 reconfigured, RunNumber 204240, LBN 870
 01 Jun 2012 18:19:35 CEST   LBA54 seems to be off (at least the ROD link is off). [Run #204240 LB #877] 
 01 Jun 2012 18:21:22 CEST   Start reconfiguring drawer TileLBA54, RunNumber 204240, LBN 879
 01 Jun 2012 18:21:35 CEST   Drawer TileLBA54 reconfigured, RunNumber 204240, LBN 879
 01 Jun 2012 18:24:22 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 18:29:25 CEST   LBC14 seems to be off (at least the ROD link is off). [Run #204240 LB #887] 
 01 Jun 2012 18:30:52 CEST   Start reconfiguring drawer TileLBC14, RunNumber 204240, LBN 889
 01 Jun 2012 18:31:04 CEST   Drawer TileLBC14 reconfigured, RunNumber 204240, LBN 889
 01 Jun 2012 18:34:05 CEST   LBA26 seems to be off (at least the ROD link is off). [Run #204240 LB #892] 
 01 Jun 2012 18:35:43 CEST   Start reconfiguring drawer TileLBA26, RunNumber 204240, LBN 894
 01 Jun 2012 18:35:55 CEST   Drawer TileLBA26 reconfigured, RunNumber 204240, LBN 894
 01 Jun 2012 18:43:25 CEST   EBA10 seems to be off (at least the ROD link is off). [Run #204240 LB #903] 
 01 Jun 2012 18:44:26 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 18:45:02 CEST   Start reconfiguring drawer TileEBA10, RunNumber 204240, LBN 905
 01 Jun 2012 18:45:14 CEST   Drawer TileEBA10 reconfigured, RunNumber 204240, LBN 905
 01 Jun 2012 18:50:26 CEST   LBA60 seems to be off (at least the ROD link is off). [Run #204240 LB #910] 
 01 Jun 2012 18:52:23 CEST   Start reconfiguring drawer TileLBA60, RunNumber 204240, LBN 912
 01 Jun 2012 18:52:35 CEST   Drawer TileLBA60 reconfigured, RunNumber 204240, LBN 912
 01 Jun 2012 18:59:55 CEST   LBA32 seems to be off (at least the ROD link is off). [Run #204240 LB #919] 
 01 Jun 2012 18:59:55 CEST   EBC54 seems to be off (at least the ROD link is off). [Run #204240 LB #919] 
 01 Jun 2012 19:01:32 CEST   Start reconfiguring drawer TileLBA32, RunNumber 204240, LBN 921
 01 Jun 2012 19:01:33 CEST   Start reconfiguring drawer TileEBC54, RunNumber 204240, LBN 921
 01 Jun 2012 19:01:44 CEST   Drawer TileEBC54 reconfigured, RunNumber 204240, LBN 921
 01 Jun 2012 19:01:45 CEST   Drawer TileLBA32 reconfigured, RunNumber 204240, LBN 921
 01 Jun 2012 19:04:30 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 19:09:25 CEST   LBA09 seems to be off (at least the ROD link is off). [Run #204240 LB #929] 
 01 Jun 2012 19:10:52 CEST   Start reconfiguring drawer TileLBA09, RunNumber 204240, LBN 930
 01 Jun 2012 19:11:05 CEST   Drawer TileLBA09 reconfigured, RunNumber 204240, LBN 930
 01 Jun 2012 19:11:55 CEST   LBA16 seems to be off (at least the ROD link is off). [Run #204240 LB #931] 
 01 Jun 2012 19:13:32 CEST   Start reconfiguring drawer TileLBA16, RunNumber 204240, LBN 933
 01 Jun 2012 19:13:45 CEST   Drawer TileLBA16 reconfigured, RunNumber 204240, LBN 933
 01 Jun 2012 19:20:27 CEST   LBA52 seems to be off (at least the ROD link is off). [Run #204240 LB #940] 
 01 Jun 2012 19:21:54 CEST   Start reconfiguring drawer TileLBA52, RunNumber 204240, LBN 942
 01 Jun 2012 19:22:06 CEST   Drawer TileLBA52 reconfigured, RunNumber 204240, LBN 942
 01 Jun 2012 19:24:31 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 19:37:16 CEST   LBC39 seems to be off (at least the ROD link is off). [Run #204240 LB #959] 
 01 Jun 2012 19:38:43 CEST   Start reconfiguring drawer TileLBC39, RunNumber 204240, LBN 960
 01 Jun 2012 19:38:55 CEST   Drawer TileLBC39 reconfigured, RunNumber 204240, LBN 960
 01 Jun 2012 19:41:26 CEST   LBC59 seems to be off (at least the ROD link is off). [Run #204240 LB #963] 
 01 Jun 2012 19:42:53 CEST   Start reconfiguring drawer TileLBC59, RunNumber 204240, LBN 964
 01 Jun 2012 19:43:06 CEST   Drawer TileLBC59 reconfigured, RunNumber 204240, LBN 964
 01 Jun 2012 19:44:34 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 19:56:36 CEST   LBA26 seems to be off (at least the ROD link is off). [Run #204240 LB #978] 
 01 Jun 2012 19:58:13 CEST   Start reconfiguring drawer TileLBA26, RunNumber 204240, LBN 979
 01 Jun 2012 19:58:25 CEST   Drawer TileLBA26 reconfigured, RunNumber 204240, LBN 979
 01 Jun 2012 20:04:38 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 20:06:06 CEST   EBC21 seems to be off (at least the ROD link is off). [Run #204240 LB #988] 
 01 Jun 2012 20:06:56 CEST   LBC28 seems to be off (at least the ROD link is off). [Run #204240 LB #989] 
 01 Jun 2012 20:07:32 CEST   Start reconfiguring drawer TileEBC21, RunNumber 204240, LBN 989
 01 Jun 2012 20:07:44 CEST   Drawer TileEBC21 reconfigured, RunNumber 204240, LBN 989
 01 Jun 2012 20:08:23 CEST   Start reconfiguring drawer TileLBC28, RunNumber 204240, LBN 990
 01 Jun 2012 20:08:35 CEST   Drawer TileLBC28 reconfigured, RunNumber 204240, LBN 990
 01 Jun 2012 20:16:46 CEST   LBC07 seems to be off (at least the ROD link is off). [Run #204240 LB #998] 
 01 Jun 2012 20:18:06 CEST   LBA16 seems to be off (at least the ROD link is off). [Run #204240 LB #1000] 
 01 Jun 2012 20:18:23 CEST   Start reconfiguring drawer TileLBC07, RunNumber 204240, LBN 1000
 01 Jun 2012 20:18:35 CEST   Drawer TileLBC07 reconfigured, RunNumber 204240, LBN 1000
 01 Jun 2012 20:19:36 CEST   LBC56 seems to be off (at least the ROD link is off). [Run #204240 LB #1001] 
 01 Jun 2012 20:19:43 CEST   Start reconfiguring drawer TileLBA16, RunNumber 204240, LBN 1001
 01 Jun 2012 20:19:55 CEST   Drawer TileLBA16 reconfigured, RunNumber 204240, LBN 1001
 01 Jun 2012 20:21:13 CEST   Start reconfiguring drawer TileLBC56, RunNumber 204240, LBN 1003
 01 Jun 2012 20:21:26 CEST   Drawer TileLBC56 reconfigured, RunNumber 204240, LBN 1003
 01 Jun 2012 20:24:40 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 20:36:56 CEST   LBC11 seems to be off (at least the ROD link is off). [Run #204240 LB #1019] 
 01 Jun 2012 20:38:33 CEST   Start reconfiguring drawer TileLBC11, RunNumber 204240, LBN 1020
 01 Jun 2012 20:38:46 CEST   Drawer TileLBC11 reconfigured, RunNumber 204240, LBN 1020
 01 Jun 2012 20:44:42 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 20:47:46 CEST   LBA37 seems to be off (at least the ROD link is off). [Run #204240 LB #1030] 
 01 Jun 2012 20:48:36 CEST   LBA22 seems to be off (at least the ROD link is off). [Run #204240 LB #1031] 
 01 Jun 2012 20:49:14 CEST   Start reconfiguring drawer TileLBA37, RunNumber 204240, LBN 1031
 01 Jun 2012 20:49:26 CEST   Drawer TileLBA37 reconfigured, RunNumber 204240, LBN 1031
 01 Jun 2012 20:50:03 CEST   Start reconfiguring drawer TileLBA22, RunNumber 204240, LBN 1032
 01 Jun 2012 20:50:15 CEST   Drawer TileLBA22 reconfigured, RunNumber 204240, LBN 1032
 01 Jun 2012 21:03:47 CEST   LBC58 seems to be off (at least the ROD link is off). [Run #204240 LB #1045] 
 01 Jun 2012 21:04:44 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 21:05:24 CEST   Start reconfiguring drawer TileLBC58, RunNumber 204240, LBN 1047
 01 Jun 2012 21:05:36 CEST   Drawer TileLBC58 reconfigured, RunNumber 204240, LBN 1047
 01 Jun 2012 21:06:26 CEST   LBC11 seems to be off (at least the ROD link is off). [Run #204240 LB #1048] 
 01 Jun 2012 21:07:53 CEST   Start reconfiguring drawer TileLBC11, RunNumber 204240, LBN 1049
 01 Jun 2012 21:08:06 CEST   Drawer TileLBC11 reconfigured, RunNumber 204240, LBN 1049
 01 Jun 2012 21:10:46 CEST   LBA09 seems to be off (at least the ROD link is off). [Run #204240 LB #1052] 
 01 Jun 2012 21:12:13 CEST   Start reconfiguring drawer TileLBA09, RunNumber 204240, LBN 1054
 01 Jun 2012 21:12:26 CEST   Drawer TileLBA09 reconfigured, RunNumber 204240, LBN 1054
 01 Jun 2012 21:23:57 CEST   LBA16 seems to be off (at least the ROD link is off). [Run #204240 LB #1066] 
 01 Jun 2012 21:24:48 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 21:25:44 CEST   Start reconfiguring drawer TileLBA16, RunNumber 204240, LBN 1068
 01 Jun 2012 21:25:56 CEST   Drawer TileLBA16 reconfigured, RunNumber 204240, LBN 1068
 01 Jun 2012 21:30:26 CEST   LBA02 seems to be off (at least the ROD link is off). [Run #204240 LB #1073] 
 01 Jun 2012 21:32:03 CEST   Start reconfiguring drawer TileLBA02, RunNumber 204240, LBN 1074
 01 Jun 2012 21:32:16 CEST   Drawer TileLBA02 reconfigured, RunNumber 204240, LBN 1074
 01 Jun 2012 21:33:06 CEST   LBA02 is discarding 100% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 01 Jun 2012 21:33:13 CEST   Start reconfiguring drawer TileLBA02, RunNumber 204240, LBN 1075
 01 Jun 2012 21:33:26 CEST   Drawer TileLBA02 reconfigured, RunNumber 204240, LBN 1075
 01 Jun 2012 21:34:16 CEST   LBA02 is still discarding 99.9998% of events after reconfiguration. It will be automatically power cycled now. Please check the next MRS messages and DCS alarms. 
 01 Jun 2012 21:35:53 CEST   Start reconfiguring drawer TileLBA02, RunNumber 204240, LBN 1078
 01 Jun 2012 21:36:06 CEST   Drawer TileLBA02 reconfigured, RunNumber 204240, LBN 1078
 01 Jun 2012 21:36:37 CEST   LBC30 seems to be off (at least the ROD link is off). [Run #204240 LB #1079] 
 01 Jun 2012 21:38:04 CEST   Start reconfiguring drawer TileLBC30, RunNumber 204240, LBN 1080
 01 Jun 2012 21:38:16 CEST   Drawer TileLBC30 reconfigured, RunNumber 204240, LBN 1080
 01 Jun 2012 21:44:49 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 21:50:57 CEST   LBA14 seems to be off (at least the ROD link is off). [Run #204240 LB #1093] 
 01 Jun 2012 21:52:44 CEST   Start reconfiguring drawer TileLBA14, RunNumber 204240, LBN 1095
 01 Jun 2012 21:52:56 CEST   Drawer TileLBA14 reconfigured, RunNumber 204240, LBN 1095
 01 Jun 2012 21:53:37 CEST   LBA54 seems to be off (at least the ROD link is off). [Run #204240 LB #1096] 
 01 Jun 2012 21:55:04 CEST   Start reconfiguring drawer TileLBA54, RunNumber 204240, LBN 1097
 01 Jun 2012 21:55:17 CEST   Drawer TileLBA54 reconfigured, RunNumber 204240, LBN 1097
 01 Jun 2012 21:55:47 CEST   LBA52 seems to be off (at least the ROD link is off). [Run #204240 LB #1098] 
 01 Jun 2012 21:57:14 CEST   Start reconfiguring drawer TileLBA52, RunNumber 204240, LBN 1100
 01 Jun 2012 21:57:27 CEST   Drawer TileLBA52 reconfigured, RunNumber 204240, LBN 1100
 01 Jun 2012 21:59:57 CEST   LBA40 seems to be off (at least the ROD link is off). [Run #204240 LB #1103] 
 01 Jun 2012 22:01:07 CEST   LBC19 seems to be off (at least the ROD link is off). [Run #204240 LB #1104] 
 01 Jun 2012 22:01:34 CEST   Start reconfiguring drawer TileLBA40, RunNumber 204240, LBN 1104
 01 Jun 2012 22:01:47 CEST   Drawer TileLBA40 reconfigured, RunNumber 204240, LBN 1104
 01 Jun 2012 22:02:34 CEST   Start reconfiguring drawer TileLBC19, RunNumber 204240, LBN 1106
 01 Jun 2012 22:02:46 CEST   Drawer TileLBC19 reconfigured, RunNumber 204240, LBN 1106
 01 Jun 2012 22:04:52 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 22:24:54 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 22:29:58 CEST   LBA52 seems to be off (at least the ROD link is off). [Run #204240 LB #1133] 
 01 Jun 2012 22:31:35 CEST   Start reconfiguring drawer TileLBA52, RunNumber 204240, LBN 1135
 01 Jun 2012 22:31:48 CEST   Drawer TileLBA52 reconfigured, RunNumber 204240, LBN 1135
 01 Jun 2012 22:37:57 CEST   LBC37 seems to be off (at least the ROD link is off). [Run #204240 LB #1143] 
 01 Jun 2012 22:39:25 CEST   Start reconfiguring drawer TileLBC37, RunNumber 204240, LBN 1144
 01 Jun 2012 22:39:37 CEST   Drawer TileLBC37 reconfigured, RunNumber 204240, LBN 1144
 01 Jun 2012 22:44:56 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 22:46:18 CEST   LBC60 seems to be off (at least the ROD link is off). [Run #204240 LB #1151] 
 01 Jun 2012 22:47:55 CEST   Start reconfiguring drawer TileLBC60, RunNumber 204240, LBN 1153
 01 Jun 2012 22:48:07 CEST   Drawer TileLBC60 reconfigured, RunNumber 204240, LBN 1153
 01 Jun 2012 23:04:58 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 23:09:48 CEST   LBC55 seems to be off (at least the ROD link is off). [Run #204240 LB #1174] 
 01 Jun 2012 23:11:25 CEST   Start reconfiguring drawer TileLBC55, RunNumber 204240, LBN 1176
 01 Jun 2012 23:11:37 CEST   Drawer TileLBC55 reconfigured, RunNumber 204240, LBN 1176
 01 Jun 2012 23:21:19 CEST   LBA54 seems to be off (at least the ROD link is off). [Run #204240 LB #1186] 
 01 Jun 2012 23:22:46 CEST   Start reconfiguring drawer TileLBA54, RunNumber 204240, LBN 1187
 01 Jun 2012 23:22:58 CEST   Drawer TileLBA54 reconfigured, RunNumber 204240, LBN 1187
 01 Jun 2012 23:25:00 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 23:45:04 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 01 Jun 2012 23:46:58 CEST   EBA60 seems to be off (at least the ROD link is off). [Run #204240 LB #1211] 
 01 Jun 2012 23:48:36 CEST   Start reconfiguring drawer TileEBA60, RunNumber 204240, LBN 1212
 01 Jun 2012 23:48:48 CEST   Drawer TileEBA60 reconfigured, RunNumber 204240, LBN 1212
 02 Jun 2012 00:05:08 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 00:07:39 CEST   EBA47 seems to be off (at least the ROD link is off). [Run #204240 LB #1231] 
 02 Jun 2012 00:09:26 CEST   Start reconfiguring drawer TileEBA47, RunNumber 204240, LBN 1233
 02 Jun 2012 00:09:37 CEST   Drawer TileEBA47 reconfigured, RunNumber 204240, LBN 1233
 02 Jun 2012 00:10:38 CEST   LBC04 seems to be off (at least the ROD link is off). [Run #204240 LB #1234] 
 02 Jun 2012 00:12:05 CEST   Start reconfiguring drawer TileLBC04, RunNumber 204240, LBN 1235
 02 Jun 2012 00:12:17 CEST   Drawer TileLBC04 reconfigured, RunNumber 204240, LBN 1235
 02 Jun 2012 00:17:17 CEST   EBC08 seems to be off (at least the ROD link is off). [Run #204240 LB #1241] 
 02 Jun 2012 00:19:04 CEST   Start reconfiguring drawer TileEBC08, RunNumber 204240, LBN 1242
 02 Jun 2012 00:19:16 CEST   Drawer TileEBC08 reconfigured, RunNumber 204240, LBN 1242
 02 Jun 2012 00:19:48 CEST   EBA24 seems to be off (at least the ROD link is off). [Run #204240 LB #1243] 
 02 Jun 2012 00:21:25 CEST   Start reconfiguring drawer TileEBA24, RunNumber 204240, LBN 1245
 02 Jun 2012 00:21:37 CEST   Drawer TileEBA24 reconfigured, RunNumber 204240, LBN 1245
 02 Jun 2012 00:25:10 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 00:31:39 CEST   LBA35 seems to be off (at least the ROD link is off). [Run #204240 LB #1255] 
 02 Jun 2012 00:33:46 CEST   Start reconfiguring drawer TileLBA35, RunNumber 204240, LBN 1257
 02 Jun 2012 00:33:58 CEST   Drawer TileLBA35 reconfigured, RunNumber 204240, LBN 1257
 02 Jun 2012 00:45:14 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 01:03:59 CEST   LBA40 seems to be off (at least the ROD link is off). [Run #204240 LB #1289] 
 02 Jun 2012 01:05:17 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 01:05:46 CEST   Start reconfiguring drawer TileLBA40, RunNumber 204240, LBN 1291
 02 Jun 2012 01:05:58 CEST   Drawer TileLBA40 reconfigured, RunNumber 204240, LBN 1291
 02 Jun 2012 01:12:49 CEST   LBA45 seems to be off (at least the ROD link is off). [Run #204240 LB #1300] 
 02 Jun 2012 01:13:19 CEST   LBC55 seems to be off (at least the ROD link is off). [Run #204240 LB #1300] 
 02 Jun 2012 01:14:26 CEST   Start reconfiguring drawer TileLBA45, RunNumber 204240, LBN 1301
 02 Jun 2012 01:14:39 CEST   Drawer TileLBA45 reconfigured, RunNumber 204240, LBN 1301
 02 Jun 2012 01:14:56 CEST   Start reconfiguring drawer TileLBC55, RunNumber 204240, LBN 1302
 02 Jun 2012 01:15:09 CEST   Drawer TileLBC55 reconfigured, RunNumber 204240, LBN 1302
 02 Jun 2012 01:19:09 CEST   LBA34 seems to be off (at least the ROD link is off). [Run #204240 LB #1307] 
 02 Jun 2012 01:20:36 CEST   Start reconfiguring drawer TileLBA34, RunNumber 204240, LBN 1308
 02 Jun 2012 01:20:48 CEST   Drawer TileLBA34 reconfigured, RunNumber 204240, LBN 1308
 02 Jun 2012 01:22:09 CEST   LBA16 seems to be off (at least the ROD link is off). [Run #204240 LB #1310] 
 02 Jun 2012 01:23:56 CEST   Start reconfiguring drawer TileLBA16, RunNumber 204240, LBN 1311
 02 Jun 2012 01:24:08 CEST   Drawer TileLBA16 reconfigured, RunNumber 204240, LBN 1311
 02 Jun 2012 01:25:19 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 01:29:49 CEST   EBA63 seems to be off (at least the ROD link is off). [Run #204240 LB #1317] 
 02 Jun 2012 01:30:30 CEST   LBC55 seems to be off (at least the ROD link is off). [Run #204240 LB #1318] 
 02 Jun 2012 01:31:09 CEST   LBA45 seems to be off (at least the ROD link is off). [Run #204240 LB #1319] 
 02 Jun 2012 01:31:16 CEST   Start reconfiguring drawer TileEBA63, RunNumber 204240, LBN 1319
 02 Jun 2012 01:31:28 CEST   Drawer TileEBA63 reconfigured, RunNumber 204240, LBN 1319
 02 Jun 2012 01:31:57 CEST   Start reconfiguring drawer TileLBC55, RunNumber 204240, LBN 1319
 02 Jun 2012 01:32:09 CEST   Drawer TileLBC55 reconfigured, RunNumber 204240, LBN 1319
 02 Jun 2012 01:32:09 CEST   LBA22 seems to be off (at least the ROD link is off). [Run #204240 LB #1320] 
 02 Jun 2012 01:32:19 CEST   EBA63 is discarding 99.9995% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 02 Jun 2012 01:32:26 CEST   Start reconfiguring drawer TileEBA63, RunNumber 204240, LBN 1320
 02 Jun 2012 01:32:37 CEST   Drawer TileEBA63 reconfigured, RunNumber 204240, LBN 1320
 02 Jun 2012 01:32:56 CEST   Start reconfiguring drawer TileLBA45, RunNumber 204240, LBN 1320
 02 Jun 2012 01:33:09 CEST   Drawer TileLBA45 reconfigured, RunNumber 204240, LBN 1320
 02 Jun 2012 01:33:29 CEST   EBA63 is still discarding 100% of events after reconfiguration. It will be automatically power cycled now. Please check the next MRS messages and DCS alarms. 
 02 Jun 2012 01:33:46 CEST   Start reconfiguring drawer TileLBA22, RunNumber 204240, LBN 1321
 02 Jun 2012 01:33:58 CEST   Drawer TileLBA22 reconfigured, RunNumber 204240, LBN 1321
 02 Jun 2012 01:35:16 CEST   Start reconfiguring drawer TileEBA63, RunNumber 204240, LBN 1323
 02 Jun 2012 01:35:28 CEST   Drawer TileEBA63 reconfigured, RunNumber 204240, LBN 1323
 02 Jun 2012 01:37:09 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 01:45:20 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 01:45:50 CEST   EBA58 seems to be off (at least the ROD link is off). [Run #204240 LB #1333] 
 02 Jun 2012 01:47:17 CEST   Start reconfiguring drawer TileEBA58, RunNumber 204240, LBN 1334
 02 Jun 2012 01:47:28 CEST   Drawer TileEBA58 reconfigured, RunNumber 204240, LBN 1334
 02 Jun 2012 01:48:49 CEST   LBA13 seems to be off (at least the ROD link is off). [Run #204240 LB #1336] 
 02 Jun 2012 01:50:16 CEST   Start reconfiguring drawer TileLBA13, RunNumber 204240, LBN 1337
 02 Jun 2012 01:50:29 CEST   Drawer TileLBA13 reconfigured, RunNumber 204240, LBN 1337
 02 Jun 2012 01:57:10 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 02:05:22 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 02:17:14 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 02:24:49 CEST   LBA28 seems to be off (at least the ROD link is off). [Run #204240 LB #1373] 
 02 Jun 2012 02:25:23 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 02:26:47 CEST   Start reconfiguring drawer TileLBA28, RunNumber 204240, LBN 1375
 02 Jun 2012 02:26:59 CEST   Drawer TileLBA28 reconfigured, RunNumber 204240, LBN 1375
 02 Jun 2012 02:37:18 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 02:43:59 CEST   EBC49 seems to be off (at least the ROD link is off). [Run #204240 LB #1392] 
 02 Jun 2012 02:45:26 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 02:45:26 CEST   Start reconfiguring drawer TileEBC49, RunNumber 204240, LBN 1393
 02 Jun 2012 02:45:38 CEST   Drawer TileEBC49 reconfigured, RunNumber 204240, LBN 1393
 02 Jun 2012 02:47:20 CEST   LBC50 seems to be off (at least the ROD link is off). [Run #204240 LB #1395] 
 02 Jun 2012 02:48:57 CEST   Start reconfiguring drawer TileLBC50, RunNumber 204240, LBN 1397
 02 Jun 2012 02:49:09 CEST   Drawer TileLBC50 reconfigured, RunNumber 204240, LBN 1397
 02 Jun 2012 02:49:59 CEST   EBC45 seems to be off (at least the ROD link is off). [Run #204240 LB #1398] 
 02 Jun 2012 02:50:30 CEST   LBA33 seems to be off (at least the ROD link is off). [Run #204240 LB #1398] 
 02 Jun 2012 02:51:37 CEST   Start reconfiguring drawer TileEBC45, RunNumber 204240, LBN 1399
 02 Jun 2012 02:51:48 CEST   Drawer TileEBC45 reconfigured, RunNumber 204240, LBN 1399
 02 Jun 2012 02:52:27 CEST   Start reconfiguring drawer TileLBA33, RunNumber 204240, LBN 1400
 02 Jun 2012 02:52:39 CEST   Drawer TileLBA33 reconfigured, RunNumber 204240, LBN 1400
 02 Jun 2012 02:57:21 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 03:03:19 CEST   LBC61 seems to be off (at least the ROD link is off). [Run #204240 LB #1412] 
 02 Jun 2012 03:04:57 CEST   Start reconfiguring drawer TileLBC61, RunNumber 204240, LBN 1413
 02 Jun 2012 03:05:09 CEST   Drawer TileLBC61 reconfigured, RunNumber 204240, LBN 1413
 02 Jun 2012 03:05:28 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 03:07:11 CEST   EBA54 seems to be off (at least the ROD link is off). [Run #204240 LB #1416] 
 02 Jun 2012 03:08:38 CEST   Start reconfiguring drawer TileEBA54, RunNumber 204240, LBN 1417
 02 Jun 2012 03:08:49 CEST   Drawer TileEBA54 reconfigured, RunNumber 204240, LBN 1417
 02 Jun 2012 03:17:23 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 03:25:31 CEST   Low PPM trigger rate in Tile module LBA37 Tower 5.  Tower ID 0x06190400, Eta=0.45 Phi=-2.7 (4,36). Check L1Calo map; module reconfiguration might be needed. 
 02 Jun 2012 03:37:24 CEST   Low PPM trigger rate in Tile module EBA63 Tower 4.  Tower ID 0x061f0f00, Eta=1.25 Phi=-0.15 (12,62). Check L1Calo map; module reconfiguration might be needed.