# LVPS trip messages from MRS DAQ LogManager. S.Chekanov (ANL)
 03 Jul 2012 22:11:17 CEST   LBA61 is discarding 100% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 03 Jul 2012 22:11:17 CEST   LBA01 seems to be off (at least the ROD link is off). [Run #206368 LB #2] 
 03 Jul 2012 22:11:18 CEST   LBA22 is discarding 100% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 03 Jul 2012 22:11:18 CEST   LBA52 is discarding 100% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 03 Jul 2012 22:11:24 CEST   Start reconfiguring drawer TileLBA61, RunNumber 206368, LBN 2
 03 Jul 2012 22:11:36 CEST   Drawer TileLBA61 reconfigured, RunNumber 206368, LBN 2
 03 Jul 2012 22:11:45 CEST   Start reconfiguring drawer TileLBA22, RunNumber 206368, LBN 2
 03 Jul 2012 22:11:57 CEST   Drawer TileLBA22 reconfigured, RunNumber 206368, LBN 2
 03 Jul 2012 22:12:06 CEST   Start reconfiguring drawer TileLBA52, RunNumber 206368, LBN 2
 03 Jul 2012 22:12:18 CEST   Drawer TileLBA52 reconfigured, RunNumber 206368, LBN 2
 03 Jul 2012 22:12:54 CEST   Start reconfiguring drawer TileLBA01, RunNumber 206368, LBN 5
 03 Jul 2012 22:13:06 CEST   Drawer TileLBA01 reconfigured, RunNumber 206368, LBN 5
 03 Jul 2012 22:15:30 CEST   Low PPM trigger rate in Tile module EBA51 Tower 1.  Tower ID 0x061e0302, Eta=0.95 Phi=-1.33 (9,50). Check L1Calo map; module reconfiguration might be needed. 
 03 Jul 2012 22:15:30 CEST   Low PPM trigger rate in Tile module EBA62 Tower 1.  Tower ID 0x061e0c03, Eta=0.95 Phi=-0.25 (9,61). Check L1Calo map; module reconfiguration might be needed. 
 03 Jul 2012 22:15:30 CEST   Low PPM trigger rate in Tile module EBA63 Tower 1.  Tower ID 0x061e0f02, Eta=0.95 Phi=-0.15 (9,62). Check L1Calo map; module reconfiguration might be needed. 
 03 Jul 2012 22:27:58 CEST   LBA34 seems to be off (at least the ROD link is off). [Run #206368 LB #24] 
 03 Jul 2012 22:29:45 CEST   Start reconfiguring drawer TileLBA34, RunNumber 206368, LBN 25
 03 Jul 2012 22:29:57 CEST   Drawer TileLBA34 reconfigured, RunNumber 206368, LBN 25
 03 Jul 2012 22:35:33 CEST   Low PPM trigger rate in Tile module EBA51 Tower 1.  Tower ID 0x061e0302, Eta=0.95 Phi=-1.33 (9,50). Check L1Calo map; module reconfiguration might be needed. 
 03 Jul 2012 22:39:38 CEST   LBA33 seems to be off (at least the ROD link is off). [Run #206368 LB #37] 
 03 Jul 2012 22:41:17 CEST   Start reconfiguring drawer TileLBA33, RunNumber 206368, LBN 38
 03 Jul 2012 22:41:29 CEST   Drawer TileLBA33 reconfigured, RunNumber 206368, LBN 38
 03 Jul 2012 22:50:38 CEST   EBA06 seems to be off (at least the ROD link is off). [Run #206368 LB #50] 
 03 Jul 2012 22:52:25 CEST   Start reconfiguring drawer TileEBA06, RunNumber 206368, LBN 53
 03 Jul 2012 22:52:36 CEST   Drawer TileEBA06 reconfigured, RunNumber 206368, LBN 53
 03 Jul 2012 22:57:48 CEST   LBC11 seems to be off (at least the ROD link is off). [Run #206368 LB #60] 
 03 Jul 2012 22:59:15 CEST   Start reconfiguring drawer TileLBC11, RunNumber 206368, LBN 62
 03 Jul 2012 22:59:27 CEST   Drawer TileLBC11 reconfigured, RunNumber 206368, LBN 62
 03 Jul 2012 23:01:58 CEST   LBA58 seems to be off (at least the ROD link is off). [Run #206368 LB #65] 
 03 Jul 2012 23:03:25 CEST   Start reconfiguring drawer TileLBA58, RunNumber 206368, LBN 66
 03 Jul 2012 23:03:38 CEST   Drawer TileLBA58 reconfigured, RunNumber 206368, LBN 66
 03 Jul 2012 23:07:08 CEST   LBA56 seems to be off (at least the ROD link is off). [Run #206368 LB #70] 
 03 Jul 2012 23:08:35 CEST   Start reconfiguring drawer TileLBA56, RunNumber 206368, LBN 71
 03 Jul 2012 23:08:48 CEST   Drawer TileLBA56 reconfigured, RunNumber 206368, LBN 71
 03 Jul 2012 23:21:58 CEST   EBA34 seems to be off (at least the ROD link is off). [Run #206368 LB #88] 
 03 Jul 2012 23:23:45 CEST   Start reconfiguring drawer TileEBA34, RunNumber 206368, LBN 90
 03 Jul 2012 23:23:57 CEST   Drawer TileEBA34 reconfigured, RunNumber 206368, LBN 90
 03 Jul 2012 23:26:18 CEST   EBC61 seems to be off (at least the ROD link is off). [Run #206368 LB #92] 
 03 Jul 2012 23:27:45 CEST   Start reconfiguring drawer TileEBC61, RunNumber 206368, LBN 93
 03 Jul 2012 23:27:57 CEST   Drawer TileEBC61 reconfigured, RunNumber 206368, LBN 93
 03 Jul 2012 23:36:39 CEST   LBA52 seems to be off (at least the ROD link is off). [Run #206368 LB #103] 
 03 Jul 2012 23:38:26 CEST   Start reconfiguring drawer TileLBA52, RunNumber 206368, LBN 105
 03 Jul 2012 23:38:38 CEST   Drawer TileLBA52 reconfigured, RunNumber 206368, LBN 105
 03 Jul 2012 23:50:38 CEST   LBA12 seems to be off (at least the ROD link is off). [Run #206368 LB #118] 
 03 Jul 2012 23:52:15 CEST   Start reconfiguring drawer TileLBA12, RunNumber 206368, LBN 120
 03 Jul 2012 23:52:27 CEST   Drawer TileLBA12 reconfigured, RunNumber 206368, LBN 120
 03 Jul 2012 23:54:28 CEST   LBC30 seems to be off (at least the ROD link is off). [Run #206368 LB #123] 
 03 Jul 2012 23:55:28 CEST   LBA18 seems to be off (at least the ROD link is off). [Run #206368 LB #124] 
 03 Jul 2012 23:56:26 CEST   Start reconfiguring drawer TileLBC30, RunNumber 206368, LBN 125
 03 Jul 2012 23:56:38 CEST   Drawer TileLBC30 reconfigured, RunNumber 206368, LBN 125
 03 Jul 2012 23:57:05 CEST   Start reconfiguring drawer TileLBA18, RunNumber 206368, LBN 125
 03 Jul 2012 23:57:18 CEST   Drawer TileLBA18 reconfigured, RunNumber 206368, LBN 125
 03 Jul 2012 23:58:08 CEST   LBA18 is discarding 100% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 03 Jul 2012 23:58:15 CEST   Start reconfiguring drawer TileLBA18, RunNumber 206368, LBN 126
 03 Jul 2012 23:58:27 CEST   Drawer TileLBA18 reconfigured, RunNumber 206368, LBN 126
 03 Jul 2012 23:59:18 CEST   LBA18 is still discarding 100% of events after reconfiguration. It will be automatically power cycled now. Please check the next MRS messages and DCS alarms. 
 04 Jul 2012 00:01:05 CEST   Start reconfiguring drawer TileLBA18, RunNumber 206368, LBN 131
 04 Jul 2012 00:01:18 CEST   Drawer TileLBA18 reconfigured, RunNumber 206368, LBN 131
 04 Jul 2012 00:11:28 CEST   LBC02 seems to be off (at least the ROD link is off). [Run #206368 LB #141] 
 04 Jul 2012 00:13:15 CEST   Start reconfiguring drawer TileLBC02, RunNumber 206368, LBN 143
 04 Jul 2012 00:13:27 CEST   Drawer TileLBC02 reconfigured, RunNumber 206368, LBN 143
 04 Jul 2012 00:14:19 CEST   LBC48 seems to be off (at least the ROD link is off). [Run #206368 LB #144] 
 04 Jul 2012 00:15:56 CEST   Start reconfiguring drawer TileLBC48, RunNumber 206368, LBN 146
 04 Jul 2012 00:16:08 CEST   Drawer TileLBC48 reconfigured, RunNumber 206368, LBN 146
 04 Jul 2012 00:24:19 CEST   EBC50 seems to be off (at least the ROD link is off). [Run #206368 LB #155] 
 04 Jul 2012 00:25:47 CEST   Start reconfiguring drawer TileEBC50, RunNumber 206368, LBN 156
 04 Jul 2012 00:25:58 CEST   Drawer TileEBC50 reconfigured, RunNumber 206368, LBN 156
 04 Jul 2012 00:26:59 CEST   LBC17 seems to be off (at least the ROD link is off). [Run #206368 LB #157] 
 04 Jul 2012 00:28:36 CEST   Start reconfiguring drawer TileLBC17, RunNumber 206368, LBN 159
 04 Jul 2012 00:28:48 CEST   Drawer TileLBC17 reconfigured, RunNumber 206368, LBN 159
 04 Jul 2012 00:38:19 CEST   LBC22 seems to be off (at least the ROD link is off). [Run #206368 LB #169] 
 04 Jul 2012 00:39:56 CEST   Start reconfiguring drawer TileLBC22, RunNumber 206368, LBN 171
 04 Jul 2012 00:40:08 CEST   Drawer TileLBC22 reconfigured, RunNumber 206368, LBN 171
 04 Jul 2012 01:53:42 CEST   Start reconfiguring drawer TileLBC02, RunNumber 206368, LBN 251
 04 Jul 2012 01:53:54 CEST   Drawer TileLBC02 reconfigured, RunNumber 206368, LBN 251
 04 Jul 2012 02:02:59 CEST   LBA07 seems to be off (at least the ROD link is off). [Run #206368 LB #261] 
 04 Jul 2012 02:04:26 CEST   Start reconfiguring drawer TileLBA07, RunNumber 206368, LBN 262
 04 Jul 2012 02:04:39 CEST   EBC06 seems to be off (at least the ROD link is off). [Run #206368 LB #263] 
 04 Jul 2012 02:04:39 CEST   Drawer TileLBA07 reconfigured, RunNumber 206368, LBN 262
 04 Jul 2012 02:06:06 CEST   Start reconfiguring drawer TileEBC06, RunNumber 206368, LBN 264
 04 Jul 2012 02:06:18 CEST   Drawer TileEBC06 reconfigured, RunNumber 206368, LBN 264
 04 Jul 2012 02:07:09 CEST   EBC06 is discarding 99.9997% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 04 Jul 2012 02:07:16 CEST   Start reconfiguring drawer TileEBC06, RunNumber 206368, LBN 265
 04 Jul 2012 02:07:28 CEST   Drawer TileEBC06 reconfigured, RunNumber 206368, LBN 265
 04 Jul 2012 02:08:19 CEST   EBC06 is still discarding 100% of events after reconfiguration. It will be automatically power cycled now. Please check the next MRS messages and DCS alarms. 
 04 Jul 2012 02:09:56 CEST   Start reconfiguring drawer TileEBC06, RunNumber 206368, LBN 268
 04 Jul 2012 02:10:08 CEST   Drawer TileEBC06 reconfigured, RunNumber 206368, LBN 268
 04 Jul 2012 02:14:05 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 02:14:19 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 02:15:30 CEST   LBC22 seems to be off (at least the ROD link is off). [Run #206368 LB #274] 
 04 Jul 2012 02:17:07 CEST   Start reconfiguring drawer TileLBC22, RunNumber 206368, LBN 275
 04 Jul 2012 02:17:19 CEST   Drawer TileLBC22 reconfigured, RunNumber 206368, LBN 275
 04 Jul 2012 02:34:06 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 02:34:20 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 02:54:08 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 02:54:22 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:01:00 CEST   LBC08 seems to be off (at least the ROD link is off). [Run #206368 LB #325] 
 04 Jul 2012 03:02:37 CEST   Start reconfiguring drawer TileLBC08, RunNumber 206368, LBN 327
 04 Jul 2012 03:02:49 CEST   Drawer TileLBC08 reconfigured, RunNumber 206368, LBN 327
 04 Jul 2012 03:14:12 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:14:26 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:24:30 CEST   LBA09 seems to be off (at least the ROD link is off). [Run #206368 LB #351] 
 04 Jul 2012 03:25:57 CEST   Start reconfiguring drawer TileLBA09, RunNumber 206368, LBN 353
 04 Jul 2012 03:26:10 CEST   Drawer TileLBA09 reconfigured, RunNumber 206368, LBN 353
 04 Jul 2012 03:34:15 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:34:29 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:40:41 CEST   EBC48 seems to be off (at least the ROD link is off). [Run #206368 LB #367] 
 04 Jul 2012 03:42:08 CEST   Start reconfiguring drawer TileEBC48, RunNumber 206368, LBN 369
 04 Jul 2012 03:42:19 CEST   Drawer TileEBC48 reconfigured, RunNumber 206368, LBN 369
 04 Jul 2012 03:54:11 CEST   LBA29 seems to be off (at least the ROD link is off). [Run #206368 LB #383] 
 04 Jul 2012 03:54:19 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:54:33 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 03:55:38 CEST   Start reconfiguring drawer TileLBA29, RunNumber 206368, LBN 384
 04 Jul 2012 03:55:50 CEST   Drawer TileLBA29 reconfigured, RunNumber 206368, LBN 384
 04 Jul 2012 04:05:11 CEST   LBC05 seems to be off (at least the ROD link is off). [Run #206368 LB #395] 
 04 Jul 2012 04:06:38 CEST   Start reconfiguring drawer TileLBC05, RunNumber 206368, LBN 397
 04 Jul 2012 04:06:50 CEST   Drawer TileLBC05 reconfigured, RunNumber 206368, LBN 397
 04 Jul 2012 04:14:22 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 04:14:36 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 04:32:21 CEST   LBA54 seems to be off (at least the ROD link is off). [Run #206368 LB #427] 
 04 Jul 2012 04:33:49 CEST   Start reconfiguring drawer TileLBA54, RunNumber 206368, LBN 429
 04 Jul 2012 04:34:01 CEST   Drawer TileLBA54 reconfigured, RunNumber 206368, LBN 429
 04 Jul 2012 04:34:26 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 04:34:40 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 04:40:22 CEST   LBC58 seems to be off (at least the ROD link is off). [Run #206368 LB #435] 
 04 Jul 2012 04:42:09 CEST   Start reconfiguring drawer TileLBC58, RunNumber 206368, LBN 437
 04 Jul 2012 04:42:21 CEST   Drawer TileLBC58 reconfigured, RunNumber 206368, LBN 437
 04 Jul 2012 04:43:01 CEST   LBA43 seems to be off (at least the ROD link is off). [Run #206368 LB #438] 
 04 Jul 2012 04:43:12 CEST   LBA59 seems to be off (at least the ROD link is off). [Run #206368 LB #438] 
 04 Jul 2012 04:43:12 CEST   LBC58 is discarding 99.9998% of events. It will be automatically reconfigured now. Please check the next MRS messages. 
 04 Jul 2012 04:43:19 CEST   Start reconfiguring drawer TileLBC58, RunNumber 206368, LBN 438
 04 Jul 2012 04:43:31 CEST   Drawer TileLBC58 reconfigured, RunNumber 206368, LBN 438
 04 Jul 2012 04:44:22 CEST   LBC58 is still discarding 100% of events after reconfiguration. It will be automatically power cycled now. Please check the next MRS messages and DCS alarms. 
 04 Jul 2012 04:44:29 CEST   Start reconfiguring drawer TileLBA43, RunNumber 206368, LBN 439
 04 Jul 2012 04:44:41 CEST   Drawer TileLBA43 reconfigured, RunNumber 206368, LBN 439
 04 Jul 2012 04:45:08 CEST   Start reconfiguring drawer TileLBA59, RunNumber 206368, LBN 440
 04 Jul 2012 04:45:20 CEST   Drawer TileLBA59 reconfigured, RunNumber 206368, LBN 440
 04 Jul 2012 04:46:09 CEST   Start reconfiguring drawer TileLBC58, RunNumber 206368, LBN 441
 04 Jul 2012 04:46:22 CEST   Drawer TileLBC58 reconfigured, RunNumber 206368, LBN 441
 04 Jul 2012 04:54:27 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 04:54:41 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 04:54:58 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:05:01 CEST   LBA34 seems to be off (at least the ROD link is off). [Run #206368 LB #460] 
 04 Jul 2012 05:06:59 CEST   Start reconfiguring drawer TileLBA34, RunNumber 206368, LBN 461
 04 Jul 2012 05:07:11 CEST   Drawer TileLBA34 reconfigured, RunNumber 206368, LBN 461
 04 Jul 2012 05:12:31 CEST   LBC07 seems to be off (at least the ROD link is off). [Run #206368 LB #467] 
 04 Jul 2012 05:13:58 CEST   Start reconfiguring drawer TileLBC07, RunNumber 206368, LBN 468
 04 Jul 2012 05:14:11 CEST   Drawer TileLBC07 reconfigured, RunNumber 206368, LBN 468
 04 Jul 2012 05:14:30 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:14:44 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:15:01 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:23:32 CEST   EBA30 seems to be off (at least the ROD link is off). [Run #206368 LB #481] 
 04 Jul 2012 05:24:01 CEST   LBC61 seems to be off (at least the ROD link is off). [Run #206368 LB #481] 
 04 Jul 2012 05:25:09 CEST   Start reconfiguring drawer TileEBA30, RunNumber 206368, LBN 482
 04 Jul 2012 05:25:20 CEST   Drawer TileEBA30 reconfigured, RunNumber 206368, LBN 482
 04 Jul 2012 05:25:38 CEST   Start reconfiguring drawer TileLBC61, RunNumber 206368, LBN 482
 04 Jul 2012 05:25:50 CEST   Drawer TileLBC61 reconfigured, RunNumber 206368, LBN 482
 04 Jul 2012 05:34:34 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:34:48 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:35:02 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:36:12 CEST   EBC50 seems to be off (at least the ROD link is off). [Run #206368 LB #494] 
 04 Jul 2012 05:37:49 CEST   Start reconfiguring drawer TileEBC50, RunNumber 206368, LBN 497
 04 Jul 2012 05:38:01 CEST   Drawer TileEBC50 reconfigured, RunNumber 206368, LBN 497
 04 Jul 2012 05:41:52 CEST   LBC55 seems to be off (at least the ROD link is off). [Run #206368 LB #501] 
 04 Jul 2012 05:43:19 CEST   Start reconfiguring drawer TileLBC55, RunNumber 206368, LBN 503
 04 Jul 2012 05:43:31 CEST   Drawer TileLBC55 reconfigured, RunNumber 206368, LBN 503
 04 Jul 2012 05:54:38 CEST   Low PPM trigger rate in Tile module EBC06 Tower 1.  Tower ID 0x07110501, Eta=-0.95 Phi=0.54 (-10,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:54:52 CEST   Low PPM trigger rate in Tile module EBC06 Tower 3.  Tower ID 0x07110401, Eta=-1.15 Phi=0.54 (-12,5). Check L1Calo map; module reconfiguration might be needed. 
 04 Jul 2012 05:55:06 CEST   Low PPM trigger rate in Tile module LBA59 Tower 3.  Tower ID 0x061c0a00, Eta=0.25 Phi=-0.54 (2,58). Check L1Calo map; module reconfiguration might be needed.