Differences

This shows you the differences between two versions of the page.

--- fcs:cepc:intro [2016/03/23 01:23] – asc
+++ fcs:cepc:intro [2016/04/08 16:54] (current) – [Wired Visualization] asc
@@ Line 120: / Line 120: @@
 {{:fcs:mc_jets_resol_sidcc1.png|Jet resolution}}
+====== Wired Visualization ======
+You can run Jas+Wired to visualize the simulated events.  The Wired program is included in the Jas4pp program. Run it as:
+<code bash>
+jaspp sifcch1.heprep
+</code>
+You can download the heprep file from [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch1/sifcch1.heprep]];
+Alternatively, visualize the detector as **[File]-[Open data source]-[HepRep]** XML.
+You will see the detector layout.
+Now, we will visualize a single event: Open any *.slcio file you copied from HepSim as
+**[File]-[Open data source]-[LCIO]** file.  Then click a small button [Go] (top menu bar). It will process
+ events.  Then select again **[File]-[New]-[Wired 4 view]**.  You will get an image in the Wired4 display as this:
+{{:fcs:event.png?400|}}
+Now press [Go] again to look at next event.
+If you want to see how data records are organized inside the slcio file,
+do this **[File]-[New]-[LCSim Event browser]**
+To view "slcio" files, Jas4pp automatically downloads the detector  geometry from [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/]], therefore, you do not need manual download of heprep files.
  --- //[[[email protected] |Sergei Chekanov]] 2015/10/08 09:31//