ATC: ATLAS Center at ANL

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[asc:promc|<< back]]

====== Installation of ProMC  ======

**If you use Scientific-Linux 6 (x64), use pre-built ProMC binary files:**

<code>
wget http://atlaswww.hep.anl.gov/asc/promc/download/ProMC-1.5-x86_64-slc6-gcc447-opt.tgz
tar -zvxf ProMC-1.5-x86_64-slc6-gcc447-opt.tgz
source promc/setup.sh
</code>


**If you use CERN's lxplus and gcc4.8, setup PROMC as:**
<code bash>
source /afs/cern.ch/sw/lcg/contrib/gcc/4.8/x86_64-slc6/setup.sh
source /afs/cern.ch/sw/lcg/app/releases/ROOT/5.34.21/x86_64-slc6-gcc48-opt/root/bin/thisroot.sh
source /afs/cern.ch/atlas/offline/external/promc/setup.sh
</code>
which is built  for x86_64-slc6-gcc48-opt and can be used on ScientificLinux 6.X. 
Note: setting up ROOT is only needed for a few ProMC examples. ROOT is not required to run ProMC.


Note for ATLAS: you can setup the needed gcc4X compiler and Python as:
<code bash>
export ATLAS_LOCAL_ROOT_BASE=/cvmfs/atlas.cern.ch/repo/ATLASLocalRootBase
alias setupATLAS='source ${ATLAS_LOCAL_ROOT_BASE}/user/atlasLocalSetup.sh'
setupATLAS
localSetupGcc gcc481_x86_64_slc6
localSetupPython 2.7.4-x86_64-slc6-gcc48
</code>

**For the  ATLAS grid sites:**
<code bash>
source /cvmfs/atlas.cern.ch/repo/sw/external/promc/x86_64-slc6-gcc48-opt/1.5/setup.sh
</code>

**For ANL (ATLAS):**
<code bash>
source /share/sl6/set_asc.sh
</code>



====== Installation from the source (Linux) ======

ProMC is self-contained package and has a minimum requirements.
Before installing on Linux (RHEL, UBuntu etc), make sure that the following packages, in addition to the GNU compiles, are installed:

<code bash>
yum install python-pip python-setuptools zlib1g-dev zlib-devel
</code>


Then get the current ProMC release from [[https://atlaswww.hep.anl.gov/asc/promc/download/|Download page]].
You can also use [[https://github.com/Argonne-National-Laboratory/ProMC| ProMC github]].
Below we show how to download and compile the most recent ProMC package (i.e. ProMC-1.5.tgz):

<code bash>
wget http://atlaswww.hep.anl.gov/asc/promc/download/current.php -O ProMC.tgz
tar -zvxf ProMC.tgz
cd ProMC
./build.sh                  # build all source files
./install.sh [promc_dir]    # install into some directory
source [promc_dir]/setup.sh  # make it available
</code>
The script "install.sh" moves all libraries and header files to a permanent
location, given by the directory [directory]. You should have write permissions. 
Do not forget to setup ProMC (the last line)
For example:

<code bash>
./install.sh /usr/local
source /usr/local/setup.sh  # make it available
</code> 
requires administrator's write permission, while the user "home" directory does not:

<code bash>
./install.sh $HOME
source [promc_dir]/setup.sh  # make it available
</code>  
If you need to install a HEPMC converter which converts HEPMC files to ProMC files ("hepmc2promc), specify a second argument which points to the HEPMC installation

<code bash>
./install.sh [promc_dir] [hepmc_dir]
source [promc_dir]/setup.sh  # make it available
</code>  
Example: 

<code bash>
./install.sh  /usr/local  /user/local/HEPMC
source [promc_dir]/setup.sh  # set PROMC env variable
</code> 

As a check, make sure

<code bash>
echo $PROMC
</code>
returns the installation ProMC  directory. Now you can remove the original build directory "ProMC". To test the installation, go to the example directory and run the example that write and reads random numbers in a file:

<code bash>
cd $PROMC/examples/random
make
./writer # write random data to out/
./reader # read random data from out/
</code>

====== Installation from the source (Mac OS) ======

For MacOS (Darwin), first install these libraries: pkgconfig, wget, gcc. You can can use Xcode and Fink and to install such dev libraries.
If you do not use "Fink", you should use XCode and MacPort:

  * Xcode and the Xcode Command Line Tools. Then agree to Xcode license in Terminal: "**sudo xcodebuild -license**"
  * MacPorts for your version of OS X: 10.10 and then "**sudo port install pkgconfig wget**"

The current installation was tested with Xcode/Fink  or using  Xcode/MacPorts.
Next we  assume that you are using the "bash" terminal. Then repeat the same steps as for Linux:

<code bash>
bash
wget http://atlaswww.hep.anl.gov/asc/promc/download/current.php -O ProMC.tgz
tar -zvxf ProMC.tgz
cd ProMC
./build.sh                   # build all source files
./install.sh [promc_dir]     # install into [promc_dir] directory
source [promc_dir]/setup.sh  # set PROMC env variable.
</code>

To test the installation, go to the example directory and run the example that writes and reads random numbers in/from a file:

<code bash>
cd $PROMC/examples/random
make
./writer # write random data to out/
./reader # read random data from out/
</code>

You can download a compiled ProMC library (MacOS 10.10.1) from [[http://atlaswww.hep.anl.gov/asc/promc/download/promc1.5_macOS_10.10.1.tgz]].
Thanks to Larry Nodulman for verifying this installation.


===== Removing the installed ProMC =====

Run the script:

<code bash>
./uninstall.sh
</code>

it removes all  libraries from the $PROMC area. To remove the build files, run:

<code>
./clear.sh
</code>

<note tip>Tested on SL5, SL6, Ubuntu 12.04. The protocol buffer  library comes with the package.</note>

===== Download and SVN =====

ProMC can be downloaded from [[https://atlaswww.hep.anl.gov/asc/promc/download/| here]]. The SVN repository of the package is [[http://atlaswww.hep.anl.gov/asc/WebSVN/listing.php?repname=ProMC| here]]


===== Possible problems =====


Make sure that zlib-dev library is installed. Check it as:

<code>
yum install zlib-devel
</code>

or

<code>
sudo apt-get install zlib1g-dev
</code>

for Ubuntu.

Another possible problem is tha you may have already protocol buffers installed. Please remove it as
<code>
sudo apt-get remove  libprotoc-dev protobuf-compiler
</code>
(for ubuntu)

<note important>
If you read ProMC files with sizes more than 1 GB, you may see an error generated by "zipios  FCollException'what()".
This is related a bug in the zlib library. Please patch  zlib library from [[http://www.zlib.net/]].
</note>

To run ProMC with Python, you should install these packages:

<code> 
yum install python-pip python-setuptools
</code>


===== Installation on IBM BlueGene/Q =====
//(contributed by Ed May and William Scullin)//

ProMC can be installed on  IBM Blue Gene/Q (for example, on Mira at  Argonne Leadership Computing Facility).
First, you should define compilers before running "build.sh":

<code bash>
export F77=mpif77
export FC=mpif90
export CC=mpicc
export CPP=mpicxx
export CXX=mpicxx
</code>

==== Installing zlib  ====
Next, compile the **ZLIB** library using the above compiles. Download **ZLIB** from  [[http://www.zlib.net/]]. 
Then change the location of these libraries in "build.sh"
file. The ZLIB library is used by "cbook" package, so modify "cbook/Makefile":

  * Point "CPP_INCLUDEDIRS4" to the ZLIB header file
  * Point the compiler to  "libz.a" of your ZLIB installation and 

For example, you can do it as:

<code>
LIBDIR = + [ZLIB location]/zlib/lib
CPP_INCLUDEDIRS4 = -I${DIR_CURRENT}/cbook/inc/CBook -I/home/chakanau/bgheplib/bghep/utils/zlib/include/
</code>
then add to "CPP_INCLUDEDIRS4"  the line:

<code>
-I[ZLIB location]/zlib/include/
</code>

and change the last lines in the Makefile to:

<code>
lib$(MODULE)$(ext).a: objects
        ar -rv ${DIR_SHARE}/lib/lib$(MODULE)$(ext).a $(LIBOBJS)
        ranlib $(DIR_SHARE)/lib/lib$(MODULE)$(ext).a
</code>

==== Installing ProtoBuff 2.4.1 ====


Next, step is to deploy Protocol Buffers library. You may choose the ProtocolBuffers library "protobuf-2.4.1" which 
should be installed without much problems. When installing it, use:

<code bash>
configure --prefix=$DIR_INS --enable-shared=yes --enable-static=yes \
          --host=powerpc-bgp-linux --target=powerpc-bgp-linux --build=powerpc64-linux-gnu

make
make install
</code>
where $DIR_INS is the installation location. Note that the linkage can fail at the step "make install". In this case modify
"protobuf/src/Makefile"  by adding "-all-static" to all lines that have LDFLAGS (after --mode option).
Then you can install ProMC by typing "./install.sh"

<note important>If you have chosen protobuf-2.4.1, you will need some modification to ProMC browser since it is based on protobuf-2.5.</note>


==== Installing ProtoBuff 2.5 ====

The current version of ProMC 1.2 is based on protobuf-2.5, so it is recommended to deploy this version instead of  protobuf-2.4.1.
protobuf-2.5 can be deployed after some changes in the source code.

ProMC 1.2 with Protocol Buffers2.5 was deployed on  Mira (IBM Blue Gene/Q) at Argonne Leadership Computing Facility.

(we will extend this description soon)



===== Alternative installations =====

If you do not like the version of Protocol Buffer library shipped with ProMC, you can replace it. If you happen to have a custom-made Protocol Buffer library, you can rebuild ProMC using these steps:

  - Remove the directory "protobuf" inside the ProMC package
  - Copy all Protocol Buffers libraries and header files, and "protoc" binary file to the "share" directory of ProMC
  - Comment out the line where Protocol Buffers is compiled inside the "build.sh" script.

Then proceed exactly as before, i.e. run "build.sh" and then "install.sh".



 --- //[[chekanov@anl.gov|Sergei Chekanov]] 2013/03/11 21:45//
 --- //[[chekanov@anl.gov|Sergei Chekanov]] 2013/05/03 12:58//