ATC: ATLAS Center at ANL

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[fcs:fcchh|<< back]]

====== FCC-hh detector studies: Software and detectors ======
**People:** A.Kotwal (Fermilab/Duke), L.Gray (Fermilab), S.Chekanov (ANL), J.Strube (PNNL), N.Tran (Fermilab), S-S. Yu (NCU), S.Sen (Duke), J.Repond (ANL)



This wiki describes physics studies for a FCC-hh detector.
You can download such samples as discussed in [[http://atlaswww.hep.anl.gov/hepsim/description.php|HepSim manual]].
This wiki is rather generic, but the detector is still evolving. So, please pay attention to the detector we are using for the ongoing studies.




<note tip>
The current FCC-hh detector is **sifcch7**. It is a compact high-segmented detector based on SiD. You can find this detector 
in the [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/|detector repository]]. 
Look for **sifcch7.zip** file. This detector corresponds to [[http://atlaswww.hep.anl.gov/hepsim/list.php?find=rfull009|rfull009 tag]] SLCIO  files in HepSim.
The description of this detector is [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch7/sifcch7.html|here]].
</note>



The results shown on this page use the [[https://atlaswww.hep.anl.gov/asc/jas4pp/|Jas4pp]] data-analysis package.
The installation does not have external dependencies besides Java. Make sure Java7 and above is installed.
Then run these commands to install the package using Linux/Mac with the "bash" shell:

<code bash>
wget http://atlaswww.hep.anl.gov/asc/jas4pp/download/current.php -O jas4pp.tgz
tar -zvxf jas4pp.tgz
cd jas4pp
source ./setup.sh # takes 5 sec for first-time optimization
</code>
The last command optimizes Java packages for the Python language.
Now you are ready to run over  any file with truth-level and datector-simulation files, such as LCIO and ProMC. This program can be used for:

  * Downloading and searching HepSim data
  * Processing ProMC files from HepSim
  * Running over SLCIO files with Geant4 simulated / reconstructed events.
  * Data analysis (jets, physics vectors, histogram packages)
  * Visualisation of reconstructed events using Wired4 display

You can find more details in [[asc:jas4pp|Jas4pp manual]]. The example showing how to run over SLCIO files using [[https://atlaswww.hep.anl.gov/asc/jas4pp/|Jas4pp]] are located in the "examples/slic" directory of the Jas4pp package.



====== LCIO event structure ======


The standard set of containers is available from the LCIO files posted on HepSim. Read
[[http://lcio.desy.de/v02-04-03/doc/manual_html/manual.html|Manual]]. The API is described in 
[[http://lcio.desy.de/v02-04-03/doc/api/| LCIO Java API description]].

Look the Java API definition of the needed objects in [[http://www.lcsim.org/sites/lcsim/apidocs/org/lcsim/lcio/package-summary.html|org.lcsim.lcio]]. The data containers are shown below:

<hidden>
<code>
BeamCalHits
CalorimeterHitRelations
EM_BARREL
EM_ENDCAP
EcalBarrelHits
EcalEndcapHits
HAD_BARREL
HAD_ENDCAP
HcalBarrelHits
HcalEndcapHits
HelicalTrackHitRelations
HelicalTrackHits
HelicalTrackMCRelations
LumiCalHits
MCParticle
MUON_BARREL
MUON_ENDCAP
MuonBarrelHits
MuonEndcapHits
PandoraPFOCollection
ReconClusters
SiTrackerBarrelHits
SiTrackerEndcapHits
SiTrackerForwardHits
SiVertexBarrelHits
SiVertexEndcapHits
StateAtECal
StateAtEnd
StateAtStart
TKR_RawTrackerHits
TKR_TrackerHits
Tracks
VXD_RawTrackerHits
VXD_TrackerHits
</code>
</hidden>



====== Using C++/ROOT with LCIO ======

If you need to read LCIO files in C++ code with ROOT/FastJet, use this example package:

<code bash>
wget http://atlaswww.hep.anl.gov/hepsim/soft/lcio-cpp.tgz -O - | tar -xz;
cd lcio-cpp; make 
</code>
It will compile "example.cpp" file linking FastJet package. Look at README file to see how to install the "LCIO" package required by this example.  Your LCIO" files from HepSim should be in the directory "data".


  
    
====== Wired Visualization ======

The current version of the FCC-hh detector is located in the [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/|detector repository]]. Find the
zip file with your detector, say  "detector.zip" file ("detector" is the actual name of your detector).
You can study this geometry using the "description" link. 

To visualize this detector, use Wired4. Download the "detector.zip" file, unpack and locate the file "detector.heprep". Then run it as:

<code bash>
jaspp detector.heprep
</code>

Generally, when you open SLCIO file, this detector geometry is copied to the cache directory (in $HOME/.lcsim).


Alternatively, visualize the detector as **[File]-[Open data source]-[HepRep]** XML.
You will see the detector layout.

Now, we will read the event: Open any *.slcio file you copied from HepSim as 
**[File]-[Open data source]-[LCIO]** file.  Then click a small button [Go] (top menu bar). It will process
 events.  Then select again **[File]-[New]-[Wired 4 view]**.  You will get an image in the Wired4 display as this:

{{:fcs:event.png?400|}}

Now press [Go] again to look at next event.

 If you want to see how data records are organized inside the slcio file,
do this **[File]-[New]-[LCSim Event browser]**

To view "slcio" files, Jas4pp automatically downloads the detector  geometry from [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/|detector repository]], therefore, you do not need manual download of heprep files.


====== Visualizing geometry using ROOT ======
(contribution by N.Nikiforou):

You can also visualize the detector using ROOT. Here are a few steps:
Locate the file detector.gdml inside detector.zip.

<hidden>
This file is created using 
<code>
slic -g detector.lcdd -G detector.gdml
</code>
</hidden>

Once you have the GDML file, you can use ROOT to visualize it. You just
need to make sure the ROOT installation has openGL/GDML support (CERN
AFS installations have it for sure).
At the ROOT prompt do:

<code cpp>
TGeoManager::Import("detector.gdml");
gGeoManager->GetTopVolume()->Draw("ogl");
</code>
This should popup an OpenGL display with the detector which you can
clip, pan, rotate etc. See this image:

{{:fcs:fcchh:image.png?400|}}
====== People ======

This collection of tools for future collider studies  was developed at ANL (S.Chekanov, chekanov@anl.gov) 
in collaboration with Jan Strube (PNNL) (jan.strube@pnnl.gov) and Ashutosh Kotwal (Duke U) kotwal@phy.duke.edu.
The Java part of the simulator for the linear collider was designed N. Graf, J. McCormick, T.Jonson 



~~REFNOTES~~

 --- //[[chekanov@anl.gov |Sergei Chekanov]] 2015/10/08 09:31//