====== Using the Pixel Application ======

Become superuser with the 'su' command.

	cd ~/daq/rce
	source ./scripts/setup-gen3.sh
	calibGui

You can ssh into the HSIO-2 to run calibserver. This is not necessary unless you want to see real-time outputs from the server.

	ssh root@192.168.3.21
	export PATH=/root/pixelrce/bin:$PATH; export LD_LIBRARY_PATH=/root/pixelrce/lib:$LD_LIBRARY_PATH
	calibserver

To compile and upload changes to the pixel application:

	cd ~/daq/rce/build.slc6-rcf; make
	cd ~/daq/rce/build.arm-rcf; make
	cd ~/daq/rce/
	rsync -e 'ssh -l root' -rlptDv /sw/atlas/sw/lcg/LCG_81b/Boost/1.59.0_python2.7/armv7l-archlinux-gcc52-opt/lib 192.168.3.3:/root/pixelrce/ 
	rsync -rlptDv -e 'ssh -l root' build.arm-rcf/{bin,lib} 192.168.3.3:/root/pixelrce\

Use Inlink X, Outlink X, where the module is plugged into port AX. Use Rce 0.