====== TileCal maintenance ======


The division is traditionally involved in TileCal Maintenance. Here are a few photos of the 2018 maintenance complain:

http://atlaswww.hep.anl.gov/asc/tilecal/maintenance2018/

Description: {{:tilecal:mb4.pdf| MobiDick4 wiki}}
Mobidick note {{:tilecal:atl-com-tilecal-2014-062.pdf| Mobidick note4}}


GIT repository: https://gitlab.cern.ch/atlas-tile-mobidick/Willy/edit

====== Setting up MobiDick computers ======

http://ftp1.scientificlinux.org/linux/scientific/7x/x86_64/iso/

https://twiki.cern.ch/twiki/bin/view/Atlas/MobiDick4#Laptop



Software link:
https://svnweb.cern.ch/trac/atlasgroups/browser/Detectors/TileCal/MobiDICK


Computer1: mobi1 (user/pass)

HP ProBook 450 G5. CSI 0356567

Install from USB CDROM: F10, the go to boot, then go to "install from file".

Mobidick server parameters:


<code>
 192.168.0.102
 1570 (port)
 xterm -hold -e "expect -c 'spawn telnet -l root 192.168.0.102; expect \"Password:\"; send \"root\r\"; send \"./soft/MobiDICK\r\"; interact'"
</code>
Should install: xterm, telnet, expect

The IP 192.168.0.100 should be assigned to laptop automatically via DHCP server


===== Differences between software new vs old (working) version =====

===== DigNoise panel is different. =====
 

Willy version 2.9 2013-02-20
Mobidick version 5.7
David Calvet

Working  version has "Pedestal noise result"  with 52  buttons.
New version  has two bars, "High Gain test results" and "Low gain test results" with 52. Then, below: "Pedestal spread results".

===== DigLinerarity =====


This panel is missing in the working version

===== DigNoiseHV =====

Working version has only 52 buttons with "Pedestal noise results"

New version has High Gain test results, "Low Gain results" and "Pedestal spread test result"