Differences

This shows you the differences between two versions of the page.

--- community:hepsim:usage_full [2016/04/28 15:20]
asc created
+++ community:hepsim:usage_full [2017/09/30 14:35] (current)
asc
@@ Line 1: / Line 1: @@
+<note important>This manual is outdated. Please use
+http://atlaswww.hep.anl.gov/hepsim/doc/doku.php
+</note>
+[[community:hepsim:|<< back to HepSim manual]]
+====== Full detector simulations  ======
+Currently, the Geant4-based detector simulation can be done using the SLIC software. You will need to convert ProMC files to LCIO files and
+use these files for the "slic" Geant4-based program.
+To process SLCIO files, you will need [[http://atlaswww.hep.anl.gov/asc/jas4pp/|Jas4pp]]  program.
+The files with full simulations are located under the "rfullNNN" tags ("NNN" is a number)
+Here how you can find all samples that have "rfull" tag for download. Click here: [[http://atlaswww.hep.anl.gov/hepsim/list.php?find=rfull]].
+The description of the detector tags is given in [[community:hepsim:usage_detectors|Detector description]].
+ If you need to find all  files
+for a give tag, say rfull005, use this command:
+<code bash>
+hs-find tev10mumu%rfull005
+</code>
+which searches for all samples with the dataset name "tev10mumu" (mu+mu-, 40 TeV samples).
+Then download a selected sample as:
+<code bash>
+hs-get tev10mumu_pythia6_zprime10tev_qqbar%rfull005
+</code>
+The [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/| detector repository]] contains the description of available detectors.
+Each "rfullNNN" tag corresponds to the  detector given in the  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/| detector repository]].
+The physics performance studies based on full simulation files from HepSim
+are  [[fcs:start|listed here]].
+====== Processing LCIO files  ======
+To perform data analysis using LCIO files, use the [[https://atlaswww.hep.anl.gov/asc/jas4pp/|Jas4pp]] data-analysis package.
+The installation does not have external dependencies besides Java. Make sure Java7 and above is installed.
+Then run these commands to install the package using Linux/Mac with the "bash" shell:
+<code bash>
+wget http://atlaswww.hep.anl.gov/asc/jas4pp/download/current.php -O jas4pp.tgz
+tar -zvxf jas4pp.tgz
+cd jas4pp
+source ./setup.sh # takes 5 sec for first-time optimization
+</code>
+The last command optimizes Java packages for the Python language.
+Now you are ready to run over  any file with truth-level and datector-simulation files, such as LCIO and ProMC. This program can be used for:
+  * Downloading and searching HepSim data
+  * Processing ProMC files from HepSim
+  * Running over SLCIO files with Geant4 simulated / reconstructed events.
+  * Data analysis (jets, physics vectors, histogram packages)
+  * Visualisation of reconstructed events using Wired4 display
+You can find more details in [[asc:jas4pp|Jas4pp manual]]. The examples showing how to run over SLCIO files using [[https://atlaswww.hep.anl.gov/asc/jas4pp/|Jas4pp]] are located in the "examples/slic" directory of the Jas4pp package.
+The standard set of containers is available from the LCIO files posted on HepSim. Read
+[[http://lcio.desy.de/v02-04-03/doc/manual_html/manual.html|Manual]]. The API is described in
+[[http://lcio.desy.de/v02-04-03/doc/api/| LCIO Java API description]].
+Look the Java API definition of the needed objects in [[http://www.lcsim.org/sites/lcsim/apidocs/org/lcsim/lcio/package-summary.html|org.lcsim.lcio]]. The data containers are shown below:
+<hidden>
+<code>
+BeamCalHits
+CalorimeterHitRelations
+EM_BARREL
+EM_ENDCAP
+EcalBarrelHits
+EcalEndcapHits
+HAD_BARREL
+HAD_ENDCAP
+HcalBarrelHits
+HcalEndcapHits
+HelicalTrackHitRelations
+HelicalTrackHits
+HelicalTrackMCRelations
+LumiCalHits
+MCParticle
+MUON_BARREL
+MUON_ENDCAP
+MuonBarrelHits
+MuonEndcapHits
+PandoraPFOCollection
+ReconClusters
+SiTrackerBarrelHits
+SiTrackerEndcapHits
+SiTrackerForwardHits
+SiVertexBarrelHits
+SiVertexEndcapHits
+StateAtECal
+StateAtEnd
+StateAtStart
+TKR_RawTrackerHits
+TKR_TrackerHits
+Tracks
+VXD_RawTrackerHits
+VXD_TrackerHits
+</code>
+</hidden>
+====== Using C++/ROOT with LCIO ======
+If you need to read LCIO files in C++ code with ROOT/FastJet, use this example package:
+<code bash>
+wget http://atlaswww.hep.anl.gov/hepsim/soft/lcio-cpp.tgz -O - | tar -xz;
+cd lcio-cpp; make
+</code>
+It will compile "example.cpp" file linking FastJet package. Look at README file to see how to install the "LCIO" package required by this example.  Your LCIO" files from HepSim should be in the directory "data".
+====== Visualizing events with Jas+Wired ======
+You can run Jas+Wired to visualize the simulated events.  The Wired program is included in Jas4pp, so you simply run it as:
+<code bash>
+./jaspp
+</code>
+This will start a Jas3-like environment  with all needed plugins.
+Then copy the detector geometry file from the [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/| detector repository]].
+<code bash>
+wget http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sidloi3.tgz -O - | tar -xz;
+</code>
+This will create a directory "sidloi3". This detector corresponds to "rfull001" tag used for the reconstruction of pythia6_zpole_ee (Z->e+e-).
+Now we can visualize the detector as **[File]-[Open data source]-[HepRep]** XML and select the file "sidloi3.heprep" from sidloi3.tgz:
+This is how to do this using the command line:
+<code bash>
+./jaspp  sidloi3.heprep
+</code>
+You will see the detector layout:
+{{:fcs:detector.png?400|Whired4 event display}}
+Now, we will read the event: Open any *.slcio file you copied from HepSim as
+**[File]-[Open data source]-[LCIO]** file.  Then click a small button [Go] (top menu bar). It will process
+ events.  Then select again **[File]-[New]-[Wired 4 view]**.  You will get an image in the Wired4 display.
+Now press [Go] again to look at next event.
+ If you want to see how data records are organized inside the slcio file,
+do this **[File]-[New]-[LCSim Event browser]**
+Generally, when you open a SLCIO file from the HepSim, you do not need to load the geometry file. The geometry file will be downloaded automatically from HepSim and will be put to ".lcsim/cache/" inside your home directory.
+====== Visualizing geometry using ROOT ======
+(contribution from N.Nikiforou):
+You can also visualize the detector using ROOT. Here are a few steps:
+Locate the file detector.gdml inside the file detector.zip (where "detector" shows the name of the detector).
+<hidden show more details here>
+This file is created using this command during the detector design stage
+<code>
+slic -g detector.lcdd -G detector.gdml
+</code>
+</hidden>
+Once you have the GDML file, you can use ROOT to visualize it. You just
+need to make sure the ROOT installation has openGL/GDML support (CERN
+AFS installations have it for sure). At the ROOT prompt do:
+<code cpp>
+TGeoManager::Import("detector.gdml");
+gGeoManager->GetTopVolume()->Draw("ogl");
+</code>
+This should popup an OpenGL display with the detector which you can
+clip, pan, rotate etc. You will the image as shown here:
+{{:asc:image.png?400|}}
+====== People ======
+  * S.Chekanov (ANL, main developer)
+  * E.May (ANL, debugging, Wired4)
+====== Additional help ======
+  * [[http://jas.freehep.org/jas3/]] - JAS3
+  * [[http://java.freehep.org/]] - FreeHep
+  * [[http://jwork.org/dmelt]] - DMelt
+  * [[https://confluence.slac.stanford.edu/display/ilc/ILC+Detector+Simulation+FAQ]] - SLIC
+  * [[https://confluence.slac.stanford.edu/display/ilc/LCSim+Tutorials]] - SLIC
+  * [[https://atlaswww.hep.anl.gov/asc/promc/]] ProMC file format
+  * [[http://lcio.desy.de/]] LCIO file format
+ --- //[[[email protected]|Sergei Chekanov]] 2016/03/23 21:53//
-====== Full detector simulation  ======
-Currently, the full detector simulation can be done using the SLIC software. You will need to convert ProMC files to LCIO files and
-use these files for the "sclic" Geant4-based program.
-The physics performance studies are  [[fcs:start|listed here]]. They are based on  [[http://atlaswww.hep.anl.gov/asc/jas4pp|Jas4pp program]].
-How to convert ProMC to LCIO files is described in
-[[community:refhepsim&#converting_to_lcio]]

ATLAS Support Center

User Tools

Site Tools

Differences

Page Tools