Differences

This shows you the differences between two versions of the page.

--- hpc:argobalsam [2015/03/06 18:04]
jchilders [Git Tag Notes]
+++ hpc:argobalsam [2016/01/26 18:58]
jchilders [Installation]
@@ Line 77: / Line 77: @@
 ===== Installation =====
+  - On Mira: ''soft add +python'' (to get python 2.7)
   - Install <html><a href="http://pypi.python.org/pypi/virtualenv" target="_blank">virtualenv</a></html>
+    - ''wget --no-check-certificate http://pypi.python.org/packages/source/v/virtualenv/virtualenv-13.1.0.tar.gz''
   - Create install directory: ''mkdir /path/to/installation/argobalsam''
   - ''export INST_PATH=/path/to/installation/argobalsam''
   - ''cd $INST_PATH''
   - Create virtual environment: ''virtualenv argobalsam_env''
+    - On Edison:
+      - ''module load virtualenv''
+      - ''module load python/2.7''
   - Activate virtual environment: ''. argobalsam_env/bin/activate''
+    - On Edison:
+      - To use ''pip'' you need a certificate so run ''mk_pip_cabundle.sh'', then include ''%%--%%cert ~/.pip/cabundle'' in all your pip commands.
   - Install needed software:
-    - ''pip install django==1.6.2''  (necessary for python 2.6, if you have 2.7 you can go to higher django version)
+    - ''pip install django''
+      - if you have less than python-2.7 you need ''pip install django==1.6.2''
     - ''pip install south''
     - ''pip install pika''
-    - ''pip install MySql''
+    - ''pip install MySql'' (only if needed)
       - For this I had to install on SLC6 ''yum install mysql mysql-devel mysql-server''
-  - Create django project: ''django-admin.py startproject argobalsam_deploy''
+  - Create django project: ''django-admin.py startproject argobalsam''
-  - Grab software from git repo: ''git clone [email protected]:balsam.git argobalsam_deploy''  You may have to force git to write to an already existing folder, or checkout into one directory and move the files into the ''argobalsam_deploy'' directory.
+  - ''cd argobalsam''
-  - Update the following line of the ''argobalsam_deploy/argobalsam_deploy/settings.py'' file to import the site-specific settings that are needed (may need a new one):<code python>
+  - ''git clone [email protected]:balsam.git argobalsam_git''
+  - ''mv argobalsam_git/* ./''
+  - ''rm -rf argobalsam_git/''
+  - Update the following lines of ''argobalsam/settings.py'':
+    - At the Top:<code python>
 from site_settings.mira_settings import *
 </code>
-  - Move to the argobalsam_deploy directory with the ''manage.py'' script inside.
+    - <code python>
-  - Sync your database <code bash> python manage.py syncdb </code>
+INSTALLED_APPS = (
-  - Create the first migration <code bash> python manage.py schemamigration balsam_core --initial </code>
+    'django.contrib.admin',
-  - Apply the first migration <code bash> python manage.py migrate balsam_core --fake </code>
+    'django.contrib.auth',
-  - Create the first migration <code bash> python manage.py schemamigration argo_core --initial </code>
+    'django.contrib.contenttypes',
-  - Apply the first migration <code bash> python manage.py migrate argo_core --fake </code>
+    'django.contrib.sessions',
+    'django.contrib.messages',
+    'django.contrib.staticfiles',
+    'south',
+    'balsam_core',
+    'argo_core',
+)
+</code>
+    - If you are using MySQL: <code python>
+DATABASES = {
+    'default': {
+        'ENGINE': 'django.db.backends.mysql',
+        'NAME': 'your_table_name_goes_here',
+        'USER': 'your_login',
+        'PASSWORD': 'your_password',
+        'HOST': '127.0.0.1',
+        'PORT': '',
+        'CONN_MAX_AGE': 2000000,
+    }
+}
+</code>
+  - Setup your database:
+    - For Older Django using South (pre-1.7):
+      - <code bash> python manage.py syncdb </code>
+      - Create the first migration <code bash> python manage.py schemamigration balsam_core --initial </code>
+      - Apply the first migration <code bash> python manage.py migrate balsam_core --fake </code>
+      - Create the first migration <code bash> python manage.py schemamigration argo_core --initial </code>
+      - Apply the first migration <code bash> python manage.py migrate argo_core --fake </code>
+    - For newer Django (1.7,1.8):
+      - <code bash> python manage.py syncdb </code>
+    - For Django (1.9+):
+      - <code bash> python manage.py migration --fake-initial </code>
 ===== Git Tag Notes =====
 <html><a href="https://trac.alcf.anl.gov/projects/balsam/browser" target="_blank">Git Browser</a></html>
 .0
   * updated to MySQL database

ATLAS Support Center

User Tools

Site Tools

Differences

Page Tools