Differences

This shows you the differences between two versions of the page.

--- hpc:argobalsam [2015/07/01 14:51]
jchilders [Installation]
+++ hpc:argobalsam [2016/01/26 18:58]
jchilders [Installation]
@@ Line 89: / Line 89: @@
   - Activate virtual environment: ''. argobalsam_env/bin/activate''
     - On Edison:
-      - To use ''pip'' you need a certificate so run ''mk_pip_cabundle.sh'', then include ''--cert ~/.pip/cabundle'' in all your pip commands.
+      - To use ''pip'' you need a certificate so run ''mk_pip_cabundle.sh'', then include ''%%--%%cert ~/.pip/cabundle'' in all your pip commands.
   - Install needed software:
-    - ''pip install django==1.6.2''  (necessary for python 2.6, if you have 2.7 you can go to higher django version)
+    - ''pip install django''
+      - if you have less than python-2.7 you need ''pip install django==1.6.2''
     - ''pip install south''
     - ''pip install pika''
@@ Line 99: / Line 100: @@
   - ''cd argobalsam''
   - ''git clone [email protected]:balsam.git argobalsam_git''
-  - ''mv argobalsam_git/*_core ./''
+  - ''mv argobalsam_git/* ./''
-  - ''mv argobalsam_git/site_settings ./''
+  - ''rm -rf argobalsam_git/''
-  - Update the following line of the ''argobalsam/settings.py'' file to import the site-specific settings that are needed (may need a new one):<code python>
+  - Update the following lines of ''argobalsam/settings.py'':
+    - At the Top:<code python>
 from site_settings.mira_settings import *
 </code>
-  - Sync your database <code bash> python manage.py syncdb </code>
+    - <code python>
-  - Create the first migration <code bash> python manage.py schemamigration balsam_core --initial </code>
+INSTALLED_APPS = (
-  - Apply the first migration <code bash> python manage.py migrate balsam_core --fake </code>
+    'django.contrib.admin',
-  - Create the first migration <code bash> python manage.py schemamigration argo_core --initial </code>
+    'django.contrib.auth',
-  - Apply the first migration <code bash> python manage.py migrate argo_core --fake </code>
+    'django.contrib.contenttypes',
+    'django.contrib.sessions',
+    'django.contrib.messages',
+    'django.contrib.staticfiles',
+    'south',
+    'balsam_core',
+    'argo_core',
+)
+</code>
+    - If you are using MySQL: <code python>
+DATABASES = {
+    'default': {
+        'ENGINE': 'django.db.backends.mysql',
+        'NAME': 'your_table_name_goes_here',
+        'USER': 'your_login',
+        'PASSWORD': 'your_password',
+        'HOST': '127.0.0.1',
+        'PORT': '',
+        'CONN_MAX_AGE': 2000000,
+    }
+}
+</code>
+  - Setup your database:
+    - For Older Django using South (pre-1.7):
+      - <code bash> python manage.py syncdb </code>
+      - Create the first migration <code bash> python manage.py schemamigration balsam_core --initial </code>
+      - Apply the first migration <code bash> python manage.py migrate balsam_core --fake </code>
+      - Create the first migration <code bash> python manage.py schemamigration argo_core --initial </code>
+      - Apply the first migration <code bash> python manage.py migrate argo_core --fake </code>
+    - For newer Django (1.7,1.8):
+      - <code bash> python manage.py syncdb </code>
+    - For Django (1.9+):
+      - <code bash> python manage.py migration --fake-initial </code>
 ===== Git Tag Notes =====

ATLAS Support Center

User Tools

Site Tools

Differences

Page Tools