Differences

This shows you the differences between two versions of the page.

--- tilecal:maintenance [2018/02/05 14:24]
asc
+++ tilecal:maintenance [2018/11/16 12:16]
asc
@@ Line 5: / Line 5: @@
 http://atlaswww.hep.anl.gov/asc/tilecal/maintenance2018/
+Description: {{:tilecal:mb4.pdf| MobiDick4 wiki}}
+Mobidick note {{:tilecal:atl-com-tilecal-2014-062.pdf| Mobidick note4}}
+====== Setting up MobiDick computers ======
+http://ftp1.scientificlinux.org/linux/scientific/7x/x86_64/iso/
+https://twiki.cern.ch/twiki/bin/view/Atlas/MobiDick4#Laptop
+Software link:
+https://svnweb.cern.ch/trac/atlasgroups/browser/Detectors/TileCal/MobiDICK
+Computer1: mobi1 (user/pass)
+HP ProBook 450 G5. CSI 0356567
+Install from USB CDROM: F10, the go to boot, then go to "install from file".
+Mobidick server parameters:
+<code>
+.168.0.102
+(port)
+ xterm -hold -e "expect -c 'spawn telnet -l root 192.168.0.102; expect \"Password:\"; send \"root\r\"; send \"./soft/MobiDICK\r\"; interact'"
+</code>
+Should install: xterm, telnet, expect
+The IP 192.168.0.100 should be assigned to laptop automatically via DHCP server
+===== Differences between software new vs old (working) version =====
+===== DigNoise panel is different. =====
+Willy version 2.9 2013-02-20
+Mobidick version 5.7
+David Calvet
+Working  version has "Pedestal noise result"  with 52  buttons.
+New version  has two bars, "High Gain test results" and "Low gain test results" with 52. Then, below: "Pedestal spread results".
+===== DigLinerarity =====
+This panel is missing in the working version
+===== DigNoiseHV =====
+Working version has only 52 buttons with "Pedestal noise results"
+New version has High Gain test results, "Low Gain results" and "Pedestal spread test result"

ATLAS Support Center

User Tools

Site Tools

Differences

Page Tools