Differences

This shows you the differences between two versions of the page.

--- hepsim:dev_full [2017/09/21 13:50]
hepsim17
+++ hepsim:dev_full [2017/09/21 13:55]
hepsim17
@@ Line 5: / Line 5: @@
 ===== Creating LCIO files =====
-In many cases, HepSim detector simulations were done using SiD-derived software, such as those used for ILC, CLIC, etc. expeeiments.
+In many cases, HepSim detector simulations were done using SiD-derived software, such as those used for ILC, CLIC, etc. experiments. To perform such simulation, you will need to convert PROMC to SLCIO or STDHEP files.
+ You can convert ProMC data to STDHEP or LCIO (MCParticle) with full simulations using promc2stdhep or promc2lcio converters:
+<code bash>
+wget http://atlaswww.hep.anl.gov/hepsim/soft/promc_convert.tgz
+tar -zvxf promc_convert.tgz
+cd promc_convert
+promc2lcio.sh input.promc output.slcio    # convert to SLCIO
+promc2stdhep.sh input.promc output.stdhep # convert to STDHEP
+</code>
-To create full simulations, you will need to convert ProMC files  to LCIO files. This is described in
-[[hepsim:usage_truth#converting_to_lcio|LCIO conversions]].
-{{indexmenu_n>13}}
-[[:|<< back to HepSim manual]]
-===== Simulation with FPadSim =====
-In many cases, HepSim detector simulations were done using SiD-derived software.
-To create full simulations, you will need to convert ProMC files  to LCIO files. This is described in
-[[hepsim:usage_truth#converting_to_lcio|LCIO conversions]].
+Files in the LCIO or STDHEP formats can be used as input for DD4HEP or SLIC simulation packages.
+Many samples of HepSim were created a dedicated FPadSim package. See [[hepsim:dev_fpadsim|FPadSim]] section.
  --- //[[[email protected]|Sergei Chekanov]] 2017/04/12 21:58//