Differences

This shows you the differences between two versions of the page.

--- hepsim:dev_fpadsim [2017/09/24 00:20]
hepsim17 [Simulations with FPadSim]
+++ hepsim:dev_fpadsim [2017/09/24 22:52] (current)
hepsim17 [Simulations with FPadSim]
@@ Line 32: / Line 32: @@
 To process truth-level events with FpadSim, you need a few things:
-  * Tag file with detector description. The concept of tag files is described in Sect.[[hepsim:dev_tags]]. You can find all submitted tag files in [[http://atlaswww.hep.anl.gov/hepsim/recotags.php|tag file catalog]]
+  * A tag file with the detector description. The concept of tag files is described in Sect.[[hepsim:dev_tags]]. You can find all submitted tag files in [[http://atlaswww.hep.anl.gov/hepsim/recotags.php|tag file catalog]]
-  * Singularity image with pre-built libraries to process the tag file
+  * Singularity  container with pre-built libraries to process a given tag file
 The tag files should be processed with the simulation and reconstruction chain described above.
-This can be done by using [[http://singularity.lbl.gov/|Singularity]] that enables users to have full control of their environment. Install singularity (version 2.3.1 and above) and download the CentOS7 image with FPadSim software.
+This can be done by using [[http://singularity.lbl.gov/|Singularity]] that enables users to have full control of their environment. Install singularity (version 2.3.1 and above) and download the CentOS7 HEPSIM image with the  FPadSim software.
-Here is the download link [[http://atlaswww.hep.anl.gov/hepsim/centos7hepsim.img|centos7hepsim.img]] (>5 GB).
+Here is the download link [[http://atlaswww.hep.anl.gov/hepsim/soft/centos7hepsim.img|centos7hepsim.img]] (>5 GB).
-The image includes basic CentOS7 environment, and programs such as SLIC, LCSIM, slicPandora, ProMC, Jas4PP and various
+The image includes basic CentOS7 environment, and programs such as SLIC, LCSIM, slicPandora, ProMC, Jas4PP, ROOT, PYTHIA8, LHAPDF  and various converters.
-converters.
 <code bash>
-wget http://atlaswww.hep.anl.gov/hepsim/centos7hepsim.img # get the image
+wget http://atlaswww.hep.anl.gov/hepsim/soft/centos7hepsim.img # get the singularity image
-singularity  exec centos7hepsim.img  bash -l              # setup fpadsim
+singularity  exec centos7hepsim.img  bash -l                   # setup fpadsim
 </code>
+After the last line, the environment should be ready. For example, type "slic -h". It shows the available commands.
+Now you can process the tag file:
+<code bash>
+wget http://atlaswww.hep.anl.gov/hepsim/soft/rfull102.tgz
+tar -zvxf rfull102.tgz
+cd ilcsoft/rfull102/
+./TEST.sh #  runs simple a test with single particles
+</code>
+The final file after pandoraPFA reconstruction with the name *hepsim.slcio" will be created in the same directory.
+Other files after simulation and track reconstruction steps will be located inside "output" directory.
+To process other promc files, download the required promc files and edit the file Test.sh
+More information about how to use HepSim container can be found in Section [[hepsim:dev_singularity|HepSim singularity container]].
+===== Light version of FPadSim image=====
+David Blyth created a much lighter version of FPadSim image for EIC work described in Sec.[[fcs:eic:singularity|singularity image for EIC]]. It is based on Arch Linux, and does not contain the usual Linux environment included inside centos7hepsim image.
@@ Line 58: / Line 77: @@
   * A.Kotwal (Duke)
   * J.Strube (PNNL)
-  * J.Marshall (U.Cambridge
+  * J.Marshall (U.Cambridge)
  --- //[[[email protected]|Sergei Chekanov]] 2017/04/12 21:58//