Differences

This shows you the differences between two versions of the page.

--- hepsim:dev_full [2017/09/21 13:50]
hepsim17
+++ hepsim:dev_full [2017/09/21 13:57]
hepsim17 [Creating LCIO files]
@@ Line 5: / Line 5: @@
 ===== Creating LCIO files =====
-In many cases, HepSim detector simulations were done using SiD-derived software, such as those used for ILC, CLIC, etc. experiments.
+In many cases, HepSim detector simulations were done using ILCSOFT-derived software, such as those used for ILC, CLIC, etc. experiments.
+To perform Geant4 simulations, you will need to convert PROMC to SLCIO or STDHEP files. You can convert ProMC files with truth-level information to STDHEP or LCIO (MCParticle) with full simulations using promc2stdhep or promc2lcio converters:
+<code bash>
+wget http://atlaswww.hep.anl.gov/hepsim/soft/promc_convert.tgz
+tar -zvxf promc_convert.tgz
+cd promc_convert
+promc2lcio.sh input.promc output.slcio    # convert to SLCIO
+promc2stdhep.sh input.promc output.stdhep # convert to STDHEP
+</code>
+Files in the LCIO or STDHEP formats can be used as input for DD4HEP or SLIC simulation packages.
+Many samples of HepSim were created with a dedicated FPadSim package. See [[hepsim:dev_fpadsim|FPadSim section]].
  --- //[[[email protected]|Sergei Chekanov]] 2017/04/12 21:58//