Differences

This shows you the differences between two versions of the page.

--- hepsim:usage_detectors [2017/02/06 23:50]
hepsim17
+++ hepsim:usage_detectors [2017/04/03 03:04]
hepsim17
@@ Line 4: / Line 4: @@
-====== Detector description and reconstructed tags ======
+====== Detector descriptions ======
 Here we describe available reconstruction tags used by HepSim.
+All detectors can be found in [[http://atlaswww.hep.anl.gov/hepsim/detectors.php|Detector description page]].
+Data are reconstructed using the so-called reconstruction tags, which can have either "rfastXXX" or "rfullXXX" name, where XXX is a number. Each tag was reconstructed with certain detector plus some optional parameters for simulation and reconstruction
 ====== Fast simulations ======
@@ Line 19: / Line 24: @@
 The file format is ROOT.
-Look at [[community:hepsim:usage_fast|this description]].
+Look at [[:hepsim:usage_fast|this description]].
 ====== Full (Geant4) simulations ======
@@ Line 25: / Line 30: @@
-Full simulations use SLIC software.
+Full simulations use the SLIC software.  The geometry files with full detector descriptions are [[http://atlaswww.hep.anl.gov/hepsim/detectors.php|here]].
-The geometry files with full detector descriptions are [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/|here]].
 Each tag corresponds to a certain detector, and other way around. You can find the detector name using a tag as
@@ Line 65: / Line 69: @@
 | rfull012    |  Same as  SiFFC-v7, but super fine HCAL cells. HCAL cells are 1x1cm (vs 5x5 cm for SiFFC-v7)   |  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch10/sifcch10.html|description]],  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch10/sifcch10.heprep|sifcch10.heprep]],  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch10/sifcch10.gdml.gz|sifcch10.gdml.gz]]        |   [[http://atlaswww.hep.anl.gov/hepsim/list.php?find=rfull012| find=rfull012]]        | {{:hepsim:sifcc7.png?200|SiFCC-v8}} |
 | rfull013    |  Same as  SiFFC-v7, but super fine HCAL (1x1cm) and ECAL (3x3mm) cells (vs 5x5 cm and 2x2cm for SiFFC-v7)   |  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch11/sifcch11.html|description]],  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch11/sifcch11.heprep|sifcch11.heprep]],  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch11/sifcch11.gdml.gz|sifcch11.gdml.gz]]        |   [[http://atlaswww.hep.anl.gov/hepsim/list.php?find=rfull013| find=rfull013]]        | {{:hepsim:sifcc7.png?200|SiFCC-v8}} |
+| rfull014    |  Same as  SiFFC-v7, but relaxed hit cuts for HCAL and ECAL   |  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch12/sifcch12.html|description]],  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch12/sifcch12.heprep|sifcch12.heprep]],  [[http://atlaswww.hep.anl.gov/hepsim/soft/detectors/sifcch11/sifcch12.gdml.gz|sifcch12.gdml.gz]]        |   [[http://atlaswww.hep.anl.gov/hepsim/list.php?find=rfull014| find=rfull014]]        | {{:hepsim:sifcc7.png?200|SiFCC-v12}} |
-The output file format is LCIO. The files can be read as explained [[community:hepsim:usage_full|here]]. To view geometries using
+The output file format is LCIO. The files can be read as explained [[:hepsim:usage_full|here]]. To view geometries using
 ROOT geometry package, run these commands: