hepsim:usage_detectors
Differences
This shows you the differences between two versions of the page.
— | hepsim:usage_detectors [2024/07/01 21:25] (current) – created - external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | {{indexmenu_n> | ||
+ | |||
+ | [[: | ||
+ | |||
+ | |||
+ | ====== Detector descriptions ====== | ||
+ | |||
+ | Here we describe available reconstruction tags used by HepSim. | ||
+ | All detectors can be found in [[http:// | ||
+ | |||
+ | Data are reconstructed using the so-called reconstruction tags, which can have either " | ||
+ | |||
+ | You can find detectors that correspond to a given tag using [[http:// | ||
+ | |||
+ | |||
+ | |||
+ | ====== Fast simulations ====== | ||
+ | |||
+ | Fast simulations use [[https:// | ||
+ | |||
+ | ^ Tag name ^ Detector description | ||
+ | | rfast001 | ||
+ | | rfast002 | ||
+ | | rfast003 | ||
+ | | rfast004 | ||
+ | |||
+ | The file format is ROOT. | ||
+ | Look at [[: | ||
+ | |||
+ | ====== Full (Geant4) simulations ====== | ||
+ | |||
+ | |||
+ | |||
+ | Full simulations use the SLIC software. | ||
+ | |||
+ | Each tag corresponds to a certain detector, and other way around. You can find the detector name using a tag as | ||
+ | this | ||
+ | < | ||
+ | http:// | ||
+ | </ | ||
+ | this will print the detector name. Instead of [TAG], use the detector name to determine the tag. | ||
+ | Here are the examples: | ||
+ | |||
+ | Find the detector that corresponds to the tag " | ||
+ | |||
+ | [[http:// | ||
+ | |||
+ | Find the tag which corresponds to the detector sifcch8: | ||
+ | |||
+ | [[http:// | ||
+ | |||
+ | In Linux, you can retrieve this info as: | ||
+ | |||
+ | < | ||
+ | curl -s http:// | ||
+ | </ | ||
+ | |||
+ | The table below shows the available detectors: | ||
+ | |||
+ | ^ Tag name ^ Detector description | ||
+ | | rfull001 | ||
+ | | rfull002 | ||
+ | | rfull101 | ||
+ | | rfull051 | ||
+ | | rfull052 | ||
+ | | rfull006 | ||
+ | | rfull007 | ||
+ | | rfull009 | ||
+ | | rfull010 | ||
+ | | rfull011 | ||
+ | | rfull012 | ||
+ | | rfull013 | ||
+ | | rfull014 | ||
+ | |||
+ | |||
+ | |||
+ | The output file format is LCIO. The files can be read as explained [[: | ||
+ | ROOT geometry package, run these commands: | ||
+ | |||
+ | <code cpp> | ||
+ | TGeoManager:: | ||
+ | gGeoManager-> | ||
+ | </ | ||
+ | where " | ||
+ | |||
+ | --- // | ||