Table of Contents

FLIC-FTK Level-2 Interface Card

The Fast TracKer (FTK) to Level-2 Interface Card (FLIC) of the ATLAS FTK trigger upgrade is the final component in the FTK chain of custom electronics to connect the system to the High-Level trigger (HLT). The FTK performs full event tracking using the ATLAS Silicon detectors for every Level-1(L1) accepted event at 100 kHz. The FLIC is a custom Advanced Telecommunications Architecture (ATCA) card that interfaces the upstream FTK system with the ATLAS trigger and data acquisition (TDAQ) system, and allows for event processing on commercial PC blades, making use of the 10 Gb Ethernet full mesh ATCA backplane.

FLIC specification 04022016_atlas_ftk_creat_sys_spec_1.7.2.pdf

FLIC register map current_flic_register_maps.pdf

FLIC user manual flic_user.pdf

FLIC production boards

FLIC hardware design

  1. Each has 128 Mbit of fast SRAM (32 Mbit per SFP input) to implement data-driven lookup tables
  2. Track geometry data from the lookup table are inserted into the data stream “on the fly”

  1. Each implements two 10Gb Ethernet interfaces to ATCA backplane (total 40Gb output bandwidth)
  2. Each has 8 SERDES links of input from I/O processor FPGAs, matched to total ATCA output bandwidth
  3. Distribute data, from the FLIC to the multiple processor blades

FLIC slow control

FLIC Data format

The new data format agreed on March 7th,2016 is summarized in 20160402_flic_data_formats_checking.xls

SSB to FLIC input data format
FLIC to HLT output data format

https://edms.cern.ch/ui/file/1347323/2.3/FTK_DataFormat_v2.3.pdf

SSBe

Spy buffer

The FLIC spy buffer copy the tagged events from U1&U2 to U3&U4 then assembly them into ethernet package and send to ATCA processor blade via 40Gbps ATCA back plane. u3_u4_design_overview.pdf 20150629_spy_buffer_spec.pdf

Processor Blade

The manual for the adlink processor blade 6150 at ANL441142.pdf.

The manual for the adlink processor blade 6155 at CERNatca-6155_50-1g019-1000_200_en.pdf

ATCA shelf

IPMB address for the slots

Slot IPMB address
1 82
2 84
3 86
4 88
5 8a
6 8c

Shelf Manager

Power control

To turn on and off boards, follow the procedure in this link: https://docs.google.com/document/d/1AFG2NiOa7EOsIhMX3Na6mmfUw2Ab1HVlt_Txr5kHMYE/edit?usp=sharing

IPMC

Talk to the IPMC.

eg. get the device ID of the board in slot 3:

clia sendcmd (IPMB address) (netfn) (command)
clia sendcmd 86             6       1 

get Device SDR Info:

clia sendcmd (IPMB address) (netfn) (command)
clia sendcmd 86             4       20 

More detailed IPMI command can be found here: https://docs.oracle.com/cd/E19175-01/820-3148-10/Firmware.html#50487327_17788